Code P705 threw. Reset it, keeps coming back on. Messed with the gas cap, not the issue. Any other ideas besides the Neutral Switch? I didn't have this issue until I washed the car the other day. I'm lost.
Hello, the check engine light will also cause the other lights to turn on, those will usually go off when the cause for the check engine light is fixed or the check engine light is cleared by disconnecting the battery. The P705 is a transmission fault code, it refers to a problem with the transmission range sensor, this is part of the neutral start switch located on the side of the transmission where the shift selector attaches, it has a large connector with wires on it, these connectors can corrode so remove it can check and clean as needed or if nothing like that can be found replace the neutral start switch.
SOURCE: 4 runner check engine light
Find out why the light is on and fix it. That should aleviate the light problems.
SOURCE: 4 runner trouble
you need to have the computer scanned for codes and see what area is having problems. the vsc lights will come on when the check engine light is on.
SOURCE: toyota 2001 4 runner vsc lights on and trac
Those lights always come on whenever the check engine light is on.It could be from the gas cap not being tight enough or an air hose in the engine compartment coming loose. I recommend bringing your vehicle to someone that can read the codes and reset the lights for you. The codes will narrow down what the problem really is.
SOURCE: 2004 Toyota 4Runner, Regarding The VSC TRAC and VSC OFF lights
Check your switches for the VSC, some get bumped on (due to their location) and some get stuck in the "on"position.
SOURCE: 2001 Toyota 4 Runner has Trac off vsc trac and
When the computer detects certain faults it will set the check engine light on along with the other lights you've explained. I've seen this on many toyota SUV's. Usually the codes set are oxygen sensor related. There really is no relation between the oxygen sensors and the traction control system but for some reason it disables it and sets the warning lights on. Have the computer scanned for codes at a shop or at a parts store such as autozone for free.
984 views
Usually answered in minutes!
×