Cars & Trucks Logo

Related Topics:

Steve Laprise Posted on Mar 23, 2019

I have a 88 silverado 1500 everytime i put my cruise on it jerks the truck and also spits and spats any idea thanks

5 Related Answers

Anonymous

  • 13 Answers
  • Posted on Jul 07, 2009

SOURCE: 2004 chev silverado Z71 1500 4wd

That was a good suggestion by Molson. Also, if you have been doing a lot of heavy hauling, have them check the strainer, which could be a problem as well.

Ad

scott

  • 532 Answers
  • Posted on Sep 11, 2009

SOURCE: vaccum hose diagram for 88 chevy truck

it may not be a vacumn leak from a line,check the throttle shaft for movement,for example,i had a 89 1 ton 350 and my throttle shaft was moving around a lot and in order to keep it from idling high,i had to kick the throttle pedal.But also check the idle air control valve,which is the round sensor on the side of the throttle body.

Anonymous

  • 119 Answers
  • Posted on Feb 15, 2010

SOURCE: 2006 chevy silverado 1500 the trucks fell

take it to the dealer if it's waranteed

Anonymous

  • 3489 Answers
  • Posted on Feb 01, 2012

SOURCE: How to fix 2004 Chevy Silverado 1500 truck that spits and sputters at regular rpm's then when gas applied stops spitting and sputtering. Have replaced plugs, wires, distributer, distributor cap,

Recheck your firing order for basics. If this is in good, a compression test may be necessary. Which enigine do you have?

Anonymous

  • 1 Answer
  • Posted on Dec 15, 2012

SOURCE: My 2000 Chevy Silverado 1500 truck in first gear and the shifter moves freely. Any idea on what is wrong?

try the shifter cable

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

2004 Dodge Ram 1500 wipers turn on out of nowhere!

mine 2, and on 2 cars. both jeeps
i grab he stock Iever and jerk it in 4 planes. Un-natural.
and works. the contacts love to fail. High humidity yes.
just happen here 2 hours ago. and is working now.
the silly things are modular, the snap on and off.
I have spares but mine work everytime I flex them roughly.
saving tons of labor me ,removing the bloodly air bags fuse and clock springs,.
yes we all hate that and we all know why..
mine is garaged, and has no excuse to fail. ever 60k miles old.
the service manual covers the work, I have them all for jeeps.
88 up
I bet dodge is same, same owners. Chrysler.
if my cure fails
gee buy the parts. put them in.
1helpful
1answer

Keep blowing cruise control fuse on 2009 silverado Z71

You'll probably need a shop manual to find out what is protected by that fuse. Could be a component or a problem in the wiring harness.
0helpful
1answer

How do you disable cruise control on a 2007 silverado 1500 crew cab v8 4.8 LT

cruise controls have an on/off button in the hand control that enables you to disable the cruise control. ON some stalks it is a press in button on the end of the stalk
0helpful
1answer

1999 silverado transmission

Since the transmission shifting and torque converter lock (cruise speeds) up are computer controlled you need to have a scanner hooked up that can read Transmission control module (TCM) fault codes. Also check for engine codes as this could be a misfire, but in that case the check engine light should be flashing while the engine is misfiring and set a fault code. If no codes of any kind are present in memory when the testing is done you almost certainly have a mechanical fault in the transmission like a malfunctioning torque converter clutch, but even that should set a fault code, so have the testing done.
1helpful
3answers
0helpful
1answer

I have a 08 silverado 1500 and i cant figure out why my cruise control doesnt turn on anymore. everybody i ask says its the fuses but there good and the electronics arent my deal

Hello cacheek,

Check your brake lights especially the "HIGH BRAKE LIGHT" this is the one on the cab above the rear window.

If it is out replace the bulbs and recheck your cruise control operation.


Regards,
netvan
1helpful
1answer

Cruise control won't work

bad switch or a vaccume leak!!
0helpful
1answer

1997 CHEVY PU STEERING ****

that once in a while can get u injured or killed sounds like a brake or rotor problem get it fixed asap
0helpful
1answer

Clutch problems

was it a complete set? clutch , pressure plate and throughtbearing?most of the time when you buy a kit they have blocks in the pressure plate for shipping purposes they have to be removed or it will do what you are discribing. i am guessing its a hydrolic clutch.weather it is or not them blocks have to be removed.if no blocks it could be throughtout bearing maybe wrong length? or air in line for clutch.
Not finding what you are looking for?

70 views

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...