Question about 2007 Chevrolet Uplander

1 Answer

Replacing radiator support on 2007 uplander. how do I remove the front bumper surround

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Chevrolet Master
  • 1,533 Answers
Ad

5 Suggested Answers

Mikey108

Michael Zangari

  • 475 Answers

SOURCE: front bumper removal

Plastic rivets in the wheel wells, clips under the headlights, remove the grill, plastic clips under the front,
too much to write.
Go get a repair manual

Posted on Oct 07, 2008

Ad

Anonymous

  • 27 Answers

SOURCE: Replace the face skid in the front bumper

remove front bumper and it should be clear what holding the face skid in place

Posted on Nov 07, 2008

Anonymous

  • 324 Answers

SOURCE: trying to remove radiator,condenser,fan assy,

you should not have to remove the bumper to replace these, you will have to remove the core support, wich you will see 2 bolts on each side, just oin front of the radiator....

Posted on Nov 26, 2008

Ronnie Wilson

  • 1596 Answers

SOURCE: replacing front bumper on 1999 buick regal

7/16th or 10mm Sheetmetal nuts All over Behind the Bumper Thak Bumper off first

Posted on Jan 16, 2009

Fleetw00d

Fleetw00d

  • 31 Answers

SOURCE: Bumper cover removal

It is a little more complicated than that. There are two nuts below the headlight assemblies in the engine compartment. You will need to remove the battery and overflow bottle to get at the one on the passenger side. Remove the turn signals in the bumper, then there are 2 or 3 bolts holding a mounting bracket behind the each of the turn signals. There are a number of bolts with washer heads and reatiners on the underside of the bumper as the previous responder indicated.

Posted on Jan 26, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Changing radiator in 2007 ford edge do you have to remove front bumper


https://s28.postimg.org/mzupjlzfx/removal.jpg

Click on the link.
Found this info in my database.
Step number three says to remove front bumper cover. If you see a better way, use your best judgement. Sometimes the database procedures are not the easiest or quickest, it just depends? I have no experience on your particular vehicle.

Aug 24, 2017 | Ford Cars & Trucks

1 Answer

Removing rear bumper cover for 2007 uplander


Lift the tail gate. There are clips or screws along the top edge. Remove this. The clips all you do is pull the center pin with a panel tool or pliers then the rest will come out. Then you will need to remove the clips holding the rear side of each of the back wheel wells in. Under that will be more clips, screws or bolts that hold the side edges of the bumper cover on.

Aug 19, 2016 | 2007 Chevrolet Uplander

1 Answer

Removal of radiator on a 2007 ford edge


Removal & Installation
  1. Drain the cooling system.
  2. Remove the cooling fan motor and shroud, as outlined in this section.
  3. Remove the front bumper cover, as follows:
    • Raise and safely support the vehicle..
    • Remove the 2 bolts from the top of the radiator grille.
    • Remove the 4 scrivets from the top of the radiator grille.
    • Remove the 3 lower pin-type retainers.
    • Remove the 6 fender splash shield screws (3 each side).
    • Remove the 4 lower screws (2 each side).
    • Disconnect the side marker lamp electrical connectors, if equipped.
    • Disconnect the fog lamp electrical connectors, if equipped.
    • Remove the front bumper cover.
    • Pull the corner of the bumper cover from the bracket.
  4. Disconnect the upper radiator hose and lower degas bottle hose from the radiator.
  5. Disconnect the lower radiator hose from the radiator.
  6. Lift and remove the tabs from the radiator support and position the radiator towards the engine.
  7. Remove the 2 A/C condenser bolts from the radiator and separate the condenser from the radiator. To install, tighten to 10 Nm (89 inch lbs.).
  8. Remove the radiator.
To install:
  1. Installation is the reverse of the removal procedure, noting the following:
    • Tighten the A/C condenser-to-radiator bolts to 10 Nm (89 inch lbs.)
    • Fill and bleed the cooling system.

Jul 27, 2014 | 2007 Ford Edge SEL

1 Answer

How to remove 2004 sienna radiator


I have written step-by-step instructions on how to replace the radiator in a 2004-2007 Toyota Sienna, including removing the bumper: John Fixes Stuff How to Replace the Radiator on 2004 2007 Toyota Sienna

Apr 03, 2012 | 2004 Toyota Sienna

1 Answer

How to remove 2007 toyota sienna front bumper


I have written a step-by-step tutorial on how to remove (and replace) the bumper of a 2004-2007 Toyota Sienna on my blog: John Fixes Stuff How to Remove the Front Bumper on 2004 2007 Toyota Sienna

Feb 01, 2012 | 2007 Toyota Sienna

1 Answer

How to remove front bumper and grill from a 2005 Toyota Sienna


I have written up all the steps on how to remove the bumper of a 2004-2007 Toyota Sienna on my step-by-step tutorial on how to replace the radiator: John Fixes Stuff How to Replace the Radiator on 2004 2007 Toyota Sienna

Dec 19, 2011 | 2006 Toyota Sienna

1 Answer

Can u replace vw beetle radiator, without removing front fenders ond nose. bottom plastic moldimgs are gone


NOPE YOU HAVE TO REMOVE FRONT FENDERS AND BUMPER COVER. REASON YOU HAVE TO REMOVE FENDERS AND BUMPER COVER.YOU CANT REMOVE RADIATOR HOSES AND REMOVE COOLING FANS.FENDERS AND BUMPER COVER IN THE WAY.

May 21, 2011 | Volkswagen Beetle Cars & Trucks

3 Answers

Can u take vwbettle radiator out withput taking off front fenders and nose


NOPE YOU HAVE TO REMOVE FRONT FENDERS AND BUMPER COVER BECAUSE YOU HAVE TO DISCONNECT COOLANT HOSES AND REMOVE COOLANT FANS.YOU CANT GET TO RADIATOR UNLESS YOU REMOVE BOTH FENDERS AND BUMPER COVERS.

May 21, 2011 | 1999 Volkswagen Beetle

1 Answer

How do you take bumper off a ford puma?


Front Bumper (434230)

Removal
1. Remove the radiator grille.
2. Remove the left-hand front wheel.
3. Detach the fender splash shield from the bumper cover and fender (both sides).
4. Remove the air cleaner intake pipe retaining clip.
5. Detach the air cleaner intake pipe from the air cleaner housing.

1 Rotate the pipe clockwise.

2 Detach the pipe.
6. Detach the bumper cover from the fender and support bracket (both sides).
7. Remove the left-hand side bumper retaining nut.
8. Remove the right-hand side bumper retaining nut.
9. Remove the bumper.

Installation
1. To install, reverse the removal procedure.

Jan 01, 2010 | 2007 Ford F

1 Answer

Trying to remove radiator,condenser,fan assy,


you should not have to remove the bumper to replace these, you will have to remove the core support, wich you will see 2 bolts on each side, just oin front of the radiator....

Sep 15, 2008 | 1999 Volkswagen Beetle

Not finding what you are looking for?
2007 Chevrolet Uplander Logo

Related Topics:

184 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

Marvin
Marvin

Level 3 Expert

85223 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...