Does the o ring on the coil packs keep oil out of lower tube or it it a seal
SOURCE: 2002 ford taruas 3.0Lv6 keep having 2 replace coil
check your vacuum line and the electrical systems
SOURCE: ON 2002 ALTIMA 2.5 I FOUND OIL
I would try snugging down all the valve cover bolts before replacing anything. A valve cover gasket kit should have the grommets and gaskets necessary to repair this if you find no loose bolts.
SOURCE: oil in 1 1997 chrysler lhs spark plug tube
although I am not familiar with this particular engine my son's Mazda Miata had oil in the plug holes and it only required a new valve cover gasket to fix it.
SOURCE: How do I remove the oil fill tube; 2002 GMC Yukon
Just work it back and forth while lifting up on it,it just pushes in.
SOURCE: How do I replace the oil dipstick tube?
The dipstick can be pulled out of the block with a pair of vicegrips and the new one driven down into the block. Before trying to pull the dipstick tube out make sure it is not held onto the block with a small bolt.
E60 Removing And Installing, Sealing Or Replacing Oil Sump (M54)
Necessary preliminary tasks. -
- Remove intake filter housing
- Remove guide tube for oil dipstick
- Lowering front axle support
- Drain off engine oil
- Disconnect plug connection to oil level sensor.
On vehicles with automatic transmission:
- Detach oil lines from automatic transmission and from oil pan.
- Unfasten oil pan screws at transmission and engine ends.
- Lower and remove oil pan.
Installation:
Sealing faces clean and free of seal debris.
Apply approx.3 mm wide, 2 mm high coat of Drei Bond 1209 sealing agen to the area around seams.
Installation:
Or take it to a dealer....
35 views
Usually answered in minutes!
×