SOURCE: engine cooling fan
Try the cooling fan switch, it looks like a large brass nut with wires on it on the thermostat housing or radiator.
To test, pull off the wires and connect together, turn on ignition and the fans should cut in.
If they don't it could be the relay, fuse or broken wire.
The switch is easy to replace, unscrew and rescrew in the new one. Connect the wires, not important which way the wires go, and refill coolant.
SOURCE: Torque setting for peugeot 206
hallo
If you have normal 1.6 liter 206:
max bolt lenght:176,5mm
20Nm and aditional 240°
1,6 liter 16valve engine
max bolt lenght:122,6mm
20Nm and aditional 260°
Marko
SOURCE: how to turn off the airbag on peugeot 206 1.6
there should be a key switch inside the car somewhere you need to turn it to the off position with the ignition key
(it will probably be some where on the dash, in the glove box or center console)
SOURCE: peugeot 206 cc fan belt change
hi ive a peugeot 206cc 02 reg, the STOP light keeps flashing ive checked the normal oil and water but alls ok so whats the problem still runs fine and temp stays where it should??? any tips??
78 views
Usually answered in minutes!
×