Have a hyundai elantra with a drain rest code 9.76A. What is that.????

SOURCE: How can i get a pin code for hyundai Elantra 2003 . please

contact ehyundai with the V.I.N and they should be able to help you.. i am presuming it is for the stereo.

SOURCE: P0139 code for a 2003 hyundai elantra. What is this code?

Hi the code P0139 is Bank 1 sensor 2 lambda sensor fault ,possible wiring or sensor fault even if you replace the sensor you need to have the MIL lamp turned off by a Diagnostic machine,it is possible you have another fault such as poor Catalytic converter efficency giving the same fault code ,Would recomend you get the car checked and read the "live" data as the car see`s it to make an accurate diagnosis and cure

SOURCE: power window in 200 hyndaui elantra is not working

you might have a bad motor happens all the time you can get one from a auto parts store you should be able to change your self if you can work on your car.

SOURCE: 2003 Hyundai Elantra GLS. Check engine light, code PO133

Did you use a aftermarket O2 sensor or a genuine Hyundai one? If it's an aftermarket one it may be bad or not as good as the OEM one. See here for more details and other potential causes: P0133

ZJ Limited

• 17989 Answers
• Posted on Mar 25, 2010

SOURCE: need fil for error code P2626 Hyundai Elantra GLS

P2626 O2 Sensor Pumping Current Trim Circuit/Open (Bank 1 Sensor 1)

I'll sure this has to do with a faulty O2 sensor. This sensor is usually located around the header of your car, or down more on your exhaust.

Try disconnecting your battery for 30 mins, hook it back up, and start your car again. This will erase the error. See if it comes in again.

Hope this help (remember rated this post).