Where I can fine the blender door on ford expedition 2000 eddie bauer

SOURCE: Oxygen Sensor Location 2001 Ford Expedition Eddie Bauer

There are four o2 sensors on this truck. one on each side just below the exhaust manifold, and one on each side behind the second catalytic converters. (just about even with the back of the front doors.

SOURCE: diagram bypass heater cord on 2001 ford expedition eddie bauer

the heater bypass is quite simple, if you look at the firewall you will see two medium sized coolant lines, remove them from the firewall and link them together using a proper sized tube, you can purchase a kit at a parts store quite cheaply

SOURCE: location of air conditioner low pressure valve

The low pressure valve on the 01 expedition is located on the accumulator on the passenger side fire wall. The accumulator is underneath the battery relay and a grouping of wires. Had to squeeze hand underneath a heater hose and an a/c line to remove cap and hook up hose. Nothing has to be removed to locate the valve just a little touchy feely. Valve faces a 45 forward toward the engine.

Jon Adamson

• 167 Answers
• Posted on Oct 25, 2009

SOURCE: Location of Shift Solenoid in 1999 Ford Expedition Eddie Bauer?

They are round "cans" with wires attached. You should have SSA, SSB, SSC, Torque converter and Pressure Control solenoids. They control pressures and have no mechanical linkage.

SOURCE: How do you change a flywheel on a 1998 Ford

You will need to remove the transmission and (transfer case )if equipped to gain access to the flywheel. Once the tranny is out of the way you will be looking at the flywheel. If it is an automatic you will need to remove the torque converter bolts from the flywheel before tranny removal. Also if it is an automatic be sure to get the torque converter to engage the front pump in the tranny when you reinstall.