1997 Toyota Camry Logo

Related Topics:

b
bernard obremski Posted on Feb 10, 2019

I have a 1997 toyota camera with a v6 and a bad trans would the trans from a 4 cylinder camery work?

4 cylinder trans to v6 motor

1 Answer

Carmel Bugeja

Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

Corporal:

An expert that has over 10 points.

Mayor:

An expert whose answer got voted for 2 times.

  • Contributor 6 Answers
  • Posted on Feb 10, 2019
Carmel Bugeja
Contributor
Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

Corporal:

An expert that has over 10 points.

Mayor:

An expert whose answer got voted for 2 times.

Joined: Dec 15, 2015
Answers
6
Questions
0
Helped
1879
Points
16

No different housing

5 Related Answers

Anonymous

  • 1689 Answers
  • Posted on Jul 24, 2008

SOURCE: 1997 toyota 4 runner

possible causes are

hairline crack between 6, 4 and 2

aae833f.gif
worn sprak plugs and spark plug wire routing

worn out distributor, that the spark scatters

check each to make sure the engine is in good shape and no more misfire.

good luck

Ad

Anonymous

  • 1861 Answers
  • Posted on Jan 15, 2009

SOURCE: 1996 camery radio blew a fuse.location of fuse box and no.

There are 2 fuses that control the radio.

check the 20 amp DOME fuse and the 15 amp CIG/Radio fuses, in the fusebox under the dashboard.

Anonymous

  • 716 Answers
  • Posted on Jan 30, 2009

SOURCE: ignition switch or ignition cylinder??

Ignition Switch They Are Always Going Bad Your Lucky You Can Get It Acc Mode Mine Wouldn't Turn At All. I Went After Market Through A Much Cheaper Version From Autozone But Now I Have One Key For The Door And Another For The Ignition.

Anonymous

  • 1 Answer
  • Posted on Aug 12, 2009

SOURCE: 1997 toyota camery 4 cylinder automatic misfires

May need a tune- up, you know plugs and wires.

Anonymous

  • 466 Answers
  • Posted on Jan 30, 2010

SOURCE: Leaking oil from the crankshaft seal on a 2001

Ok you have to disassemble the front of the engine, remove time belt, remove crankshaft sprocket, I warn you in these engines often is the oil leak by the seal of the oil pump, so I recommend you change the seal the pump and the camshaft and thus warrant you. Thanks good luck comments

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Whats the firing order on a 1997 toyota camery 2200 4 cy

Hi Steph ! Since is a 4 (FOUR ) cylinder engine the firing order is 1342.
0helpful
1answer

Firing order for 1993 toyota camry se 6 cylinder

The firing order is 1-2-3-4-5-6 !! What could be more logical?

Going from the timing belt towards the trans end, the RH bank cylinders are 1-3-5, and the LH bank 2-4-6.
0helpful
1answer

Is a 2000 toyota camery 4 cylinder a zero

NO, BUT REPLACE TIMING BELT AT 90k AND WATER PUMP, TENSIONER, YOUR CAMRY WILL SERVE YOU WELL
0helpful
1answer
1helpful
1answer

Toyota Camery rear light warning light indicator on.

If your sure ALL of your bulbs are good(front and rear)then your bulb check relay is bad its usually in the trunk area,hope it helps have a good dayDB
0helpful
1answer

Replacement engine for 1988 4runner

The Camery motor won't work, and neither will the 3.2. Go to http://www.unitextrading.com/
These guys are the best. Champagene motors at beer prices. These guys will help you out. Don't forget to vote. Thanks
Not finding what you are looking for?

68 views

Ask a Question

Usually answered in minutes!

Top Toyota Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

ROBERT GARCIA
ROBERT GARCIA

Level 3 Expert

926 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...