How can i change carronzzeria pioneer radio language from Japanese to English

toyota - made in Japan - only has Japanese language on it's radios.


or
you could tune to an English language station.

Hi...Maybe this will help..Model # may be wrong..

http://www.fixya.com/support/t26130988-change_japanese_language_into_english How do change Japanese language into English language on my AVIC MRZ07...
The general consensus is that Pioneer Carrozzeria devices are usually intended for use in the Japanese market, if the language is already Japanese it probably cannot be changed to another language.

However, in general, when you reset a Pioneer device back to factory settings (the 'factory reset'), the first prompts received should be for
Language setting
Time setting
and so forth. So if you hard reset it, you should get a list of options to choose from, one of which would be either
'English'
or else the Japanese equivalent
'Eigo'.

So see if you can factory reset the device. This is, on Pioneer devices (generally speaking) done by holding down one button while powering the unit On... which button in this case? I am not sure (you have not stated which model of Carrozzeria device you have), but with the model # ***** could perhaps find out more specific information.

Rayland, contact the Nissan dealer to see if radio can be changed to English, if not consider getting an after market radio, a lot cheaper then a factory radio even after installation.
Simple instructions of 2013 2014 Nissan Trail Radio installation

As far as we know You cannot change the language on JDM cars.

try and find a menu section of the system by changing the modes of operation. If you can get to the menu section there will be a language drop down section that you can highlight and save

No need to translate: Changing the display language in ...

windows.microsoft.com/.../no-need-to-translate-chan...

Microsoft WindowsOpen Regional and Language Options by clicking the Start button , clicking Control Panel, clicking Clock, Language, and Region, and then clicking Regional andLanguage Options. Click the Keyboards and Languages tab. Select Japanese or another language from the drop-down list, and then click OK.

how to change japanese language display to english ...

www.tomshardware.com > Forum > Windows 8

Tom's Hardware Guide
Feb 17, 2014 - 2 posts - ‎1 author
my laptop asus k55v windows 8 64 bit Japanese language and plssss,, help me how tochange to english.

how to change language from japanese to english in ...

www.tomshardware.com > Forum > Windows XP

Tom's Hardware Guide
Nov 6, 2013 - 6 posts - ‎3 authors
u mean i cannot change the display language from japanese to english in my window xp professional japanese version, even though thru ...

How to change display language in Windows 8. - YouTube

? 3:02
https://www.youtube.com/watch?v=kWT579KhuTM
Jan 25, 2013 - Uploaded by WinTipsOrg
If the display language is Japanese - what do you do to changeit to English? ... Same problem that others ...

I know you can that you can change this by simply hooking up a scan tool for specific year. There are language options accessible for situations like this. Here is a sample of what can be changed using VAG 5052 or equivalent scanners.

Coding

• 0?xxxxx: Model
  • 1 = Lamborghini
  • 2 = Audi A3 (8P)
  • 3 = Audi A4 (8E)
  • 4 = Audi A4 Cabriolet (8H)
  • 5 = Audi A6 (4B)
  • 6 = Audi TT (8J)
  • 7 = Audi R8 (42)
• 0x?xxxx: Treble Speaker Monitoring inactive
  • 0 = Front Treble Speaker Monitoring inactive active (NOT Audi A4 Cabriolet)
  • 1 = Front Treble Speaker Monitoring inactive inactive (ONLY Audi A4 Cabriolet)
• 0xx?xxx: Sound Characteristic
  • 0 = Sound Characteristic linear
  • 1 = Audi A4 (8E)
  • 2 = Audi A6 (4B)
  • 3 = Audi A4 Cabriolet (8H)
  • 4 = Audi TT (8J)
  • 5 = Audi A3 (8P)
  • 9 = Sound System
• 0xxx?xx: Telephone/Telematic
  • 1 = Telephone not installed (Remote Feed Voltage for Microphone active)
  • 2 = Base Plate (Temic - Remote Feed Voltage for Microphone inactive)
  • 3 = Base Plate (Cullmann - Remote Feed Voltage for Microphone inactive)
  • 4 = Base Plate (Nokia - Remote Feed Voltage for Microphone inactive)
  • 5 = Telematic Europa (Remote Feed Voltage for Microphone inactive)
  • 6 = Telematic US (Remote Feed Voltage for Microphone inactive)
  • 7 = Base Plate diagnostic capable with Comfort Control
• 0xxxx?x: Equipment I
  • 1 = Tuner not installed
  • 2 = Digital-Radio installed
  • 3 = Satellite-Radio installed
  • 4 = Satellite and Digital-Radio installed
  • 5 = Analog Input (AUX) installed
  • 7 = Satellite-Radio & Analog Input (AUX) installed
• 0xxxxx?: Equipment II
  • 1 = TV-Tuner/CD-Changer/Multi-Function Steering Wheel not installed
  • 2 = TV-Tuner installed
  • 3 = CD-Changer installed
  • 4 = TV-Tuner and CD-Changer installed
  • 5 = Multi-Function Steering Wheel installed
  • 6 = TV-Tuner and Multi-Function Steering Wheel installed
  • 7 = CD-Changer and Multi-Function Steering Wheel installed
  • 8 = TV-Tuner and CD-Changer and Multi-Function Steering Wheel installed
    
    

Adaptation Channel 001: Tire Circumference The tire circumference is beeing adapted in "mm".


Channel 002: Wheel Pulse The wheel pulse describes the amount of wheel pulses per revolution.
If value 0 is entered the system calibrates automatically itself after several kilometers and inputs a value.

• 43 = Audi A3 (8P) / Audi TT (8J)
• 45 = Audi A4 (8E)

Channel 003: Language (Screen)

• 0 = German
• 1 = English (UK)
• 2 = French
• 3 = Italian
• 5 = Spanish
• 6 = Portuguese
• 7 = English (UK)

Channel 004: Back-Up Camera

• 0 = Back-Up Camera not installed
• 2 = Back-Up Camera installed

Channel 005: Speed Threshold (Video Input)

• 0 = max. 0 kph or 0 mph
• 1 = max 5 kph (Standard for Europe)

Channel 007: Options Channel 008: Volume Characteristic Channel 010: Region

• 0 = Europe/North America
• 1 = Australia/South America
• 2 = South Africa

Channel 011: Language (Speech Recognition)

• 0 = German
• 1 = English
• 2 = French
• 3 = Italian
• 5 = Spanish

Channel 018: Start Screen The start screen setting has to correspond with the control module coding, e.g. a S3 start screen doesn't work with an A4 coding.

• 0 = Standard Start Screen
• 1 = Audi S3 Start Screen
• 2 = Audi S4 Start Screen
• 3 = Audi RS4 Start Screen
• 4 = Audi TT Start Screen
• 5 = Audi R8 Start Screen

Channel 065: Read Test Channel 066: Self Test Channel 067: CD/DVD Drive

• 000 - Normal/Eject-Button enabled
• 001 = Eject CD/DVD (will not be saved)
• 255 = Eject-Button disabled/locked (Anti-Theft-Protection)

Channel 068: Screen Test Values will not be saved, they only act as initiation for each Test Picture.

• 0 = No Test Picture
• 1 = Test Picture: Red
• 2 = Test Picture: Green
• 3 = Test Picture: Blue
• 4 = Test Picture: White
• 5 = Test Picture: Black
• 6 = Test Picture: Checkerboard
• 7 = Test Picture: Checkerboard (inverted)
• 8 = Test Picture: 64 Gray Scales (vertical Bars)
• 9 = Test Picture: Special

Channel 069: Display Mechanism

• 000 = Display closed
• 001 = Display open
• 200 = Display half open (Obstacle)
• 255 = Position undefined

Channel 070: Display Brightness

• 0 = 0% Brightness (Display OFF)
• 1 = 20% Brightness
• 2 = 40% Brightness
• 3 = 60% Brightness
• 4 = 80% Brightness
• 5 = 100% Brightness

Channel 099: Transport Mode Only applies to models without Gateway/Diagnostic Interface for Databus.

• 0 = Transport Mode inactive
• 1 = Transport Mode active

Channel 111: Reset

• To perform a system reset/restart save 1 as new value.

Channel 114: FM Frequency

• Range: 875...1080

Channel 117: Signal Test (Output)

• 0 = Fader Center & Balance Center
• 1 = Fader Front & Balance Left
• 2 = Fader Front & Balance Right
• 3 = Fader Rear & Balance Left
• 4 = Fader Rear & Balance Right

Channel 136: Driver Position

• RNS-E Basic
  • 03226 = Left-Hand-Drive (LHD)
  • 02632 = Right-Hand-Drive (RHD)
• RNS-E High/US
  • 00005 = Left-Hand-Drive (LHD)
  • 00013 = Right-Hand-Drive (RHD)

sorry I think nobody can help uuuu

I varied the sequence with the command buttons until the option came up english or japanese where I punched in English.