SOURCE: 1999 Toyota Corolla interior door handle
There's two screws by the handle, pull those out and you'll see how it all connects on the inside. I was able to remove my broken one, and drill a hole into the plastic where it broke and reuse it - it's lasted over 4 years now.
SOURCE: 1994 toyota corolla alternator belt replacement
loosen the bolt that is holding the adjuster of the alternator. loosen the belt by pulling it and the alternator would slide in. remove and replace the belt.
do the reverse on installation.
remember to tighten all bolts of the adjuster and alternator after tightening the belt.
tnx 4 using fixya,
drcool
SOURCE: wheel bearing replacement left front
Diagnosing the bearings can be tricky depending on severity of wear. Typically - drone noise at highway speeds, squeeling, clicking or grinding noises at low speeds that reduce during braking, or pull off the wheel and brake assembly and check the bearing for slack or smoothness of rotation by hand. While doing this, check the brake assembly thoroughly - generally a more likely culprit of wheel noise.
Wheel bearing replacement is not for the novice backyard mech. - you will need pullers, press, etc. If you can get a rebuilt assembly - much easier.
SOURCE: How do I replace the fuel filter on my 2006 Toyota Corolla?
ITS A LIFETIME FILTER AND WITH REGULAR USE, SHOULD NEVER NEED TO BE REPLACED
SOURCE: HOW DO YOU SET THE CLOCK ON TOYOTA COROLLA AE112R
While holding the AM button, adjust the time by pushing the NUMBER BUTTONS 1-2.
Hour adjustment......NUMBER BUTTON 1
Minute adjustment...NUMBER BUTTON 2
There you go :)
60 views
Usually answered in minutes!
×