2005 Mazda Tribute Logo

Related Topics:

Posted on Aug 05, 2009
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

How can I repair my sagging rear bumper on my 2005

The rear bumper was sagging on the passenger side slightly seemingly without cause (It wasnt damaged to my knowlege). Recently I backed into another car with the drivers side of the rear bumper. Now both sides of the bumper are sagging and its slightly worse on the drivers side (about and inch sag). I would like to know what I can do on my own. Thanks.

  • Anonymous May 11, 2010

    is it just the bumper or the whole suv if just the bumper loosen bolts an adjust an retighten

×

1 Answer

Anonymous

Level 3:

An expert who has achieved level 3 by getting 1000 points

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Vice President:

An expert whose answer got voted for 100 times.

  • Master 398 Answers
  • Posted on Aug 05, 2009
Anonymous
Master
Level 3:

An expert who has achieved level 3 by getting 1000 points

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Vice President:

An expert whose answer got voted for 100 times.

Joined: Jun 30, 2009
Answers
398
Questions
1
Helped
170197
Points
1257

Go to a friend or a bodyshop. get a bumper adjuster. it has a 3 to 4 foot handle on it, with a hook on the other end. you can easly bend a bumper where you want it...

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Which clips do I buy to attach my rear bumper securely on 2000 Jaguar S Type 3.0

If you ask at a bodywork repair shop, they will tell you what is required by name.
Try not to buy Jaguar parts as they are grosly overpriced. They are the same as the Ford parts.
0helpful
1answer

2004 Lesabre. Air ride shocks recently replaced. Recently hit in the right rear. Only $1K in damage (bumper cover, tail light). Got them to toss in a 4 wheel alignment. Car is at the shop now.

If it's a strut type shock, they make a cam bolt kit for it. If it's a regular shock type, they make shims that needs to be installed between backing plates and hub
1helpful
1answer

Have a 1996 explorer sport with 200k. Daughter said the truck started to drive "like a boat tossing and turning" at highway speed. Front end was rebuilt not long ago. shocks seems fine and...

Yes this sounds like A sway bar condition and yes you can Replace just the links and bushings. I would not replace the sway bar its self unless that is infact what broke. I hope this helps you out. i would appreciate it if you would rate me.
thank you
Aaron
2helpful
3answers

Where is the horn located at on a 2005 Pontiac Grand Am?

it is located under the bumper on the passenger side.
0helpful
1answer

1995 Mercury Villager that was in an accident - bumper sticks out

I would go to a pick N pull salavge yard and buy an entire used bumper assembly.

http://groups.yahoo.com/group/villagerquest/
0helpful
2answers

My 92 seville is sagging in the back any ideas on

Yes doe's your car, have the air ride suspension if so you need to replace the air pump or the air ride shocks on the rear or look for a valve under the rear bumper or in the trunk to inflate the shocks.. if nowhere to be found then take your car, in to a shop.
Good Luck!
8helpful
1answer

How to remove the rear bumper on a 2005 Kia Sedona

1. Remove rear combination light assembly. A. Remove two mounting screws. B. Disconnect electrical connector from rear side of light assembly. bs6d007a.gif 2. Remove bumper assembly. A. Remove four fasteners and four retaining screws from top of bumper assembly. bs6d007d.gif B. Remove mud flap from bumper assembly. C. Remove two screws from bottom of bumper assembly. bs6d007e.gif D. Remove two screws from side of bumper assembly. bs6d007b.gif E. Remove four bumper mounting bolts from under of vehicle. bs6d007c.gif 3. Install rear bumper in reverse order of removal.
0helpful
1answer

Rear bumper not fitted properly on 2005 honda civic gli

hi all cars that come from the factory are quality controled so it would not be allowed out in such a shoddy condition get someone who knows what they are doing because if its in the fixing locations correctly then your panel work is out proberly due to the impact take it back best of luck yates210456
Not finding what you are looking for?

410 views

Ask a Question

Usually answered in minutes!

Top Mazda Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...