Back Passenger Weel Sounds Like its going to fall off

One day I hit a bump real hard...did not see it the low track light came on and went off but now when I get on the highway the back passenger wheel sounds like it's going to fall off what could this be and how much could something like this cost

Anonymous Aug 25, 2009

Are you sure...i am shopping around and i keep getting different answers
Anonymous Aug 26, 2009

i dont know if i explained this correctly....that answer sounds good but i have heard many diffrent things from ppl i know but urs sounds most accurate...so r u sure...what happens is as soon as i get to 75mph the wheel makes a vibrating type sound but its real loud...sometimes it does and sometimes it does not does that sound like it could be the same problem

1 Answer

Anonymous

Contributor 16 Answers
Posted on Aug 05, 2009

Anonymous

Contributor

Joined: Jul 29, 2009

Answers

Questions

Helped

7178

Points

Wheel hub bearing damaged, easy fix bolt on another - 4 bolts

Add Your Answer

Upload

Upload an image from your computer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

Loading...

Include an image. It's worth a thousand words.

prev next

Related Questions:

0helpful

2answers

I have a 2002 Pontiac Montana both low beams n both fog lights went out same time after hitting a bump, well my dad had van running and was pulling fuses on passenger side door and now it don't auto lock...

Take your father down to the local pub and leave him there then take the car to an accredited auto electrician to have it fixed NO honestly this is the best idea as it will cost less eventually to have it fixed professionally

Read full answer

Dec 14, 2014 • 2002 Pontiac Montana

1helpful

2answers

I have a 2007 dodge caliber. The car has only 47,000 miles and when I bought it in February 2013 it had 37,000. Ive only had the car for 8 months and everything was perfectly fine until I went over a...

Im not to sure if this model is fitted with accident stop. usually if you have had a bump it turns of the engine. until the code has been rest. sometime if it is this type you can take the battery off and leave it off for 12hrs and re put back on. and it resets. but not herd of them doing this. you see the bump could of lost or broken a sensor and driving with the case of it water may have got in to it and that is why it has taken this long for the problems to occur. would first start looking on the side the bump was. and check every sensor. abs is the sensors on the wheels.

Read full answer

Oct 13, 2013 • Dodge Caliber Cars & Trucks

0helpful

1answer

I had a constant grinding coming from front passenger tire. Replaced Caliper and put the worn pads back on for a day, the constant grinding went away. It would still grind while braking,hitting a bump

It sounds like the brake pads are metal to metal, when you turn the flexing of the wheel makes them touch the rotor and grind. This can rarely be caused by a badly worn wheel bearing as well, have both brakes and wheel bearing inspected.

Read full answer

Mar 02, 2017 • 1999 Pontiac Grand Am GT

1helpful

1answer

2005 Dodge Magnum low beams do not work

Obviously you have a connector which has come partially apart somewhere between the Headlights and the Headlight Switch. Most modern vehicles have several connectors between the Headlight Switch and the Headlights, Start at the Firewall Connector and work forward toward the Headlights making sure all connectors are securely mated. Another remote possibility is that you have fractured the "Low Beam Filaments" in BOTH Headlights. You don't mention how hard you hit the Speed Bump but if it caused the car to "Bottom Out" the front suspension it was a hard enough impact to fracture the filaments. You can use a 12 Volt Test Light at the Sockets for the Headlight Bulbs and see if you are getting 12 Volt power there. If you are in Low Beam position you have fractured the filaments. Check with High Beam too.

Read full answer

Nov 18, 2011 • 2005 Dodge Magnum

0helpful

1answer

Rattles really bad over bumps sounds like the front end is gonna fall off

I have a 2002 Escape 3.0L with 120,000 miles and have had a couple of rattlers.
The first was a constant light rattle. It was the sway bar links.
The second sounds like what you've got. Occasional rattle, but nasty on bumps. The rear bushing went bad on the passenger side lower control arm the control arm was banging on the "frame".

Here is a picture of my new control arm. The bad rubber bushing was the "lowest" one in the picture, near the vise.

The control arm was the cheapest from the Ford dealer; maybe $50? Repalced it myself. Not too easy.

Read full answer

Dec 28, 2010 • 2002 Ford Escape

1helpful

1answer

When i hit a bump, speakers crackle

if its a poping sound usually means speakers are going bad,crackling sound means the speakers are not grounded properly.this video might give you hint as to whats going on.

Read full answer

Jan 29, 2010 • 2006 Pontiac Grand Prix

0helpful

1answer

The low track and anti brake light come on when i hit a bump

that was just the speed sensors on the car telling you that one wheel was not the same speed as the other three,the lights should have reset and went out

Read full answer

Dec 09, 2009 • 1999 Oldsmobile Alero

0helpful

1answer

I went over railroad tracks and my low beams went out.

Hello,
From the description it would appear the filaments in both headlamp bulbs have blown/fused so inspection/replacement imminent.
Good luck!
Paul 'W'
Onyer~EDson(:0) {#><U.K.
Please remember to rate my effort!

Read full answer

Jan 20, 2009 • 2001 Dodge Durango

0helpful

2answers

I have a 2004 Envoy XL. The passenger side dim headlamp went out about 2 weeks ago and I replaced it. On Friday, I was leaving a meeting and I noticed my neither one of my headlamps were on, then I hit a...

This sounds like a loose connection/bad wire somewhere for the low beam lights. Can't really give you more information without seeing the vehicle, and wiring diagram for the circuit. Usually, things that go on and off when hitting bumps are connection/wiring problems. The fact that one of your low beam headlamps burnt supports this theory. Bad connections or wiring mean lower voltage, thus higher amperage at the bulb, motor or whatever it's running, which makes them burn a lot quicker.

Read full answer

Jan 13, 2009 • GMC Envoy XL Cars & Trucks

0helpful

1answer

Blower motor

I say it might not be the blower motor but your on the rite track!good place to start sounds like a loose wire check under hood on passenger side to see if your blower resistor speed switch is plugged in or it might been in passenger feet area above toes in heater box! I think passenger feet area might be the spot your looking for! a v shape plug! i think you will find it no problem!hope this helps

Read full answer

Dec 09, 2008 • 2001 Buick LeSabre

Not finding what you are looking for?

View Most Popular

1998 Monte Carlo

Cars & Trucks

I have a 2002 Pontiac Montana both low beams n both fog lights went out same time after hitting a bump, well my dad had van running and was pulling fuses on passenger side door and now it don't auto lock...

2002 Pontiac Montana

123 views

Ask a Question

Usually answered in minutes!

Check Out the Latest Top Trucks Report!

View all Fixya Reports

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Have a manual for 1998 Chevrolet Monte Carlo? Or just drag it here!

Related Topics:

Back Passenger Weel Sounds Like its going to fall off