SOURCE: 2007 hyundai elantra windshield washer tank removal
maybe its the fuse thats lodged inside the pump
SOURCE: remove windshield washer reservoir
Take off the wheel well shroud. Firdt remove the front right wheel, it will be easier. Then remove the two screws holding in the tank. Remove the two electrical connectons and small rubber hose. Next (or first) grab the filler tube and twist while pulling it from the tank as it is held in by a rubber gromet. Then pull the tank forward and let it drop down. Nothing else is holding it in except the two screws. Removing the filler tube is a must!
SOURCE: how to remove pump and motor to washer tank
The just push in .They have a rubber gromitt.Pump and motor are all one part.
SOURCE: How do you drain/flush the windshield washer fluid tank?
The best and easyest way is to take it out and wash it out with vinagar and hot water. There should only be three bolts holding it in so it is very easy to remove.
420 views
Usually answered in minutes!
×