2000 Buick LeSabre Logo

Related Topics:

Patty Caporrino Posted on Nov 05, 2018
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

What sizesocket do i need toremoveaxle on a 2000 lesabre

1 Answer

Dan Hooper

Level 3:

An expert who has achieved level 3 by getting 1000 points

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

  • Buick Master 4,521 Answers
  • Posted on Nov 05, 2018
Dan Hooper
Buick Master
Level 3:

An expert who has achieved level 3 by getting 1000 points

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Joined: Apr 15, 2015
Answers
4521
Questions
2
Helped
810065
Points
14307

If I remember correctly, 27mm

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

2002 Buick LeSabre. I need a wiring diagram for the stereo please?

Question edited for clarity.
Question moved to model category.

2000 Buick Lesabre Car Stereo Wire Colors and Locations

the12volt.com https://www.the12volt.com > installbay > stereodetail
2000 Buick Lesabre Stereo Wiring ; Constant 12V+, Orange ; Switched 12V+, Yellow ; Ground, Black/White ; Illumination, Gray/Black ; Dimmer, Brown/White.

..
0helpful
3answers

Where are the fuses to locate fuse for driver door panel on a 2002 buick lesabre?

PWR WDO - 30amp circuit breaker , DRV -MDL 10amp fuse - both are located in the rear fuse box .
Fuse Block Rear
Under the left side of the rear passenger compartment seat
2helpful
1answer

How do you replace crank sensor on a 2000 buick lesabre

it is located behind the harmonic balancer. you will need a harmonic balancer puller
2helpful
1answer

Ses light on code po102 and po171 2000 buck lesabre

Have 2000 Buick Lesabre custom every time car gets up to operating temp. the engine misses going down the road , also let car sit and idle and it shuts off after about 2 minutes , my code reads PO171 system to lean bank 1, changed co2 censor, mass air flow censor, plug wires, and plugs.
0helpful
2answers

I need a diagram to replace the left rear wheel bearing on a 2000 Buick LeSabre Custom

I'm going to have to replace both front bearings on my 2000 Lesabre as well. Mind firing the diagram off to me as well? Thanks a million.
[email protected]
2helpful
2answers

Need new cables for electric windows 2000 buick lesabre

You cant buy cables, the Window Regulator need to be replaced.
1helpful
1answer

Need the 2000 Buick LeSabre rear wheel Hub nut torque spec.

Those are not nuts, they are bolts. The torque spec for those bolts is 52ft.lbs
0helpful
1answer

2000 BUICK LESABRE BLOWER MOTOR

The blower motor should be two wires. Backprobe and find out which is power and which is ground and bench test it. You could have a bad blower but it sounds more like a defective speed resister.
1helpful
1answer

2000 Buick LeSabre ingintion coil and module

The coil is on top of the engine and the module on the firewall or suspension strut tower
Not finding what you are looking for?

99 views

Ask a Question

Usually answered in minutes!

Top Buick Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...