Hey. Does anyone know if there is a way to make f20a or f20b sohc engine OBD2? Is there are any wiring harness or spec. ecu's for that? All I want is OBD2 port for these type of engines. Thanks.
If you have some trouble finding connector here is some info about OBD1 and how to get code.
https://www.youtube.com/watch?v=1KZytpMjD8Y
https://www.youtube.com/watch?v=8M5BaAa6tCM
https://www.youtube.com/watch?v=nBz_CryRIBA
https://www.youtube.com/watch?v=Hc6KVYnfS4Q
It is surprising how the connector placement has been moved from one year to the next
Send issue to [email protected]. hes an eight time mastrmech and answers forfree m-f
SOURCE: 2.0 liter split port
well there is usually an easy way to tell....pop the hood and look on teh intake manifold usually it will say and should say 2.0L dohc or sohc ill check my resources and let you know if it doesnt tell you....let me know :)
SOURCE: ECU port for 99 Daewoo Leganza
I came here for the same problem. After several trips into the cold I found it. If it is the same as the 2000 Leganza, it is black, located on the drivers side, right knee, pointed down, and attached to the dash,
SOURCE: 87 samurai bolt torque specs for engine
The haynes book is not recommended since there are numerous mistakes and they still will not update. One of the biggest is the firing order.
The factory service manual is the only way to go.
Head bolts - 46 - 50.5 lbs (there is an order sequence for the bolts)
Intake & exhuast manifolds- 13.5 - 20 lbs
Flywheel - 41.5 - 47 lbs
Clutch cover - 13.5 - 20 lbs
SOURCE: Engine and Wiring Harness Diagrams
join autozone.com for free and youll find lots of free diagrams and schematics for your car that will help in all your car endeavors
346 views
Usually answered in minutes!
×