Waterpump inlet tube how to replace on a 1998 plymouth breeze

SOURCE: 1998 plymouth breeze left rear brake stays on

Your E-brake cable needs a to be loosened up and you need to see if the E. Brake is locking up, if the cable is not frayed then you have a problem with a check valve in the master cylinder or in the T where the line goes to the left and right. If you want to know how to check out the hydraulic problem it is more detailed, but first you must make sure that the mechanical part is not binding up.

SOURCE: how many hours does it take to replace the water

this depends on your experince with cars but, with r and r plus filling the cooling system lets say the average guy should do it in 1.5 hrs

SOURCE: how do you replace a blower motor in a 1998

Sit under dash on driver side very easy to do, call for 0.6 labor time to do this job.

Patrick Allen

• 171 Answers
• Posted on Jan 13, 2010

SOURCE: how do i replace an oil pump on a 1998 plymouth

you'll have to drop the oil pan,after that you see a long tube with a round screen on the end of it at the top of the tube is the oil pump

SOURCE: 1998 plymouth breeze

broken hood latch how do i open it