Question about 1995 Buick LeSabre

Open Question

1995 Buick lesabre drivers door is stuck in lock position....electronic control to door mechanism is broke

Posted by on

Ad

6 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Marc Podeszek

  • 840 Answers

SOURCE: Interior lights won't turn off 1999 BuicK LeSabre.

yes there is a relay switch in engine compartment or under dash

Posted on Jan 25, 2009

Ad

Anonymous

  • 1392 Answers

SOURCE: how to unlock a broken ford windstar rear door

You will need to remove the hatch panel, and release it manually. It is a pain in the **** with the hatch closed, but it can be done.

Posted on Jun 05, 2009

jamie

  • 1810 Answers

SOURCE: 1995 Chev Suburban rear door latch stuck in locked position

sounds like you lached the door
use a screw driver or some such tool
lift the outer handle and slip your tool in the middle of the lock hole in the door flip the lach open wile holding handle up

Posted on Dec 31, 2009

Frank Davis

  • 8 Answers

SOURCE: 1995 Buick LeSabre Where is the flasher fuse for

the turn signal/ hazard flasher is located midway down your steering colum but not all the way near the knuckle mounted on the inside of the cowl above the drivers feet. should either be a 323 or a 525 part number flasher, you could always upgrade to a electronic flasher instead of a thermal flasher. part number should be el12. all these products are made by wagner.

Posted on Feb 21, 2010

laurencemcna

  • 3 Answers

SOURCE: My 2000 Buick LeSabre Custom driver's door is

try graphite

Posted on Jun 16, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2005 Buick Rendezvous you can hear the relay clicking but the door locks will not open and close


Check for broke wires inside the boot from body to driver door , this is a common problem . If you don't find broke wire's , pull the door panel to get at driver door switch . Check for voltage an ground circuit .
Rendezvous Door Lock System Components
The power door lock system consists of the following components:
?€¢
Body control module (BCM)


?€¢
Driver door lock switch


?€¢
Front passenger door lock switch


?€¢
Door lock actuators in each of the doors


?€¢
Door lock system fuse into the BCM (BCM D 25A fuse)


Door Lock Operation
When the BCM detects a transition of either of the door lock switches to the LOCK position, it switches the door lock actuator lock control circuit to voltage. Since the lock actuator unlock control circuits are at ground potential within the BCM, the door lock actuator motors transition to the Lock position.
Driver Door Unlock Operation
When the BCM detects a transition of either of the door lock switches to the UNLOCK position, it switches the driver door lock actuator unlock control circuit to voltage. Since the door lock actuator lock control circuit is at ground potential within the BCM, the LF door lock actuator motor transitions to the Unlock position.
The driver door lock actuator unlock control circuit is a dedicated control circuit used only for the driver door lock actuator motor. This is done so that the driver door may be unlocked by itself using a keyless entry transmitter or an automatic door unlock function (if programmed).
Passenger Door Unlock Operation
When the BCM detects a transition of either of the door lock switches to the UNLOCK position, it switches the door lock actuator unlock control circuits to voltage. Since the door lock actuator lock control circuit is at ground potential within the BCM, the passenger door lock actuator motors transition to the Unlock position.
The door lock actuator unlock control circuits are dedicated control circuits used only for the passenger door lock actuator motors. This is done so that the driver door may be unlocked seperate from the passenger doors using a keyless entry transmitter or an automatic door unlock function (if programmed). This video on testing computer controlled door locks on a Subaru , doesn't matter . test yours same way > The BCM controls your door locks .
Are all of the power door locks inoperative from both door lock switches?

Oct 12, 2016 | 2005 Buick Rendezvous

1 Answer

Electronic door locks deactivated. Will not work using FOB or the electronic switch inside the doors.


Jay, If problems did indeed happen after that shop checked things, return and ask them to fix back to the way it was prior to them tinkering around.

Mar 11, 2016 | 1998 Buick LeSabre

1 Answer

Driver door controls only works drivers door only.other 3 door controls dont function at all seperately or from drivers switch


This could be a power problem, frayed wiring.

Buick LeSabre Recalls ' RepairPal

repairpal.com > Recalls > Buick
There have been 10 Buick LeSabre recalls between 1990 and 2005. Learn if your Buick LeSabre is ... GM Recalls 2000-2001 Models Due to Brake Fluid Leak from the HCU. RepairPal Expert ... Buick LeSabre Problems. 31 · Buick LeSabre ..

Aug 04, 2015 | 2001 Buick LeSabre Limited

1 Answer

Windows, side mirrors and door locks suddenly stopped working on 2002 Buick Lesabre Limited


The first thing to do would be to hook up a factory or professional type scan tool an check for DTC'S - diagnostic trouble code's . This vehicle has very complex electronic's. Serial data communication network,class2 data bus . There are electronic modules inside the door's that control the lock's ,power window's , power mirror's . Your best bet ,take it to a qualified repair shop . Not a fuse problem , driver an passenger door module each have thier own power supply. Two circuit breakers ,PWR/WDO circuit breaker 30 amp. You could check DRVMDL 10amp fuse ,located in the rear fuse box , PASSMDL 10amp fuse rear fuse box , RRDR/MDL 10 amp fuse rear fuse box . Rear fuse box is under the back seat . None of the window's , lock's etc.. work from any door switch ?

Nov 30, 2017 | 2002 Buick LeSabre

2 Answers

The passenger window of my Buick Lesabre 2000 recently broke. How can I uncover the door to access to the mechanism, and what part should I replace?


The door panel is held on with some screws and plastic clips around the edges. When I went in to the rear doors, I had to pry the panels off and some of the clips broke. Plan to replace atleast a few of them. On the read door the window mechanism is a real "rube goldberg" setup that isn't really fixable. I finally cut the cables which move the windows, screwed in an anchor screw, raised the window to the closed position, and locked them in place. By the way, the local shop said it was a $800 job to repair it.

Jul 16, 2009 | 2000 Buick LeSabre

1 Answer

Where would u find electronic control unit on a 1995 Buick LeSabre


It's under the passenger side dash behind the plastic cover by the door. It's a pain in the *** to get to. Make sure it's actually bad,almost never is.

Jul 15, 2009 | 1995 Buick LeSabre

1 Answer

Fuses or switches or motors?


the wirring that goes to the door may have breaks in it, if so they will need to be repaired. would start to look at the drivers door.

Apr 16, 2009 | 1995 Buick LeSabre

1 Answer

Door doesn't open


Sounds like the latch is stuck in the lock position. You will need to remove the door panel to access the latch. This can be difficult with the door closed. You might have to remove the front seat.

Mar 16, 2009 | 1992 Buick LeSabre

1 Answer

1995 LeSabre ABS light


the anti-lock brake system is part and parcel of the traction control system. the abs has a $750.00 valve located in the engine bay on the right side (as you face the car from the front) the driver's side just behind the headlight. i had a mechanic who took it upon himself to remove, dismantle and clean and reassemble the unit, all to no avail but also without expense. the cost of the part was prohibitive since Blue Book on this car is just about $700.00. it will run and brake just fine without the abs or the traction control system either.

Oct 24, 2008 | 1995 Buick LeSabre

Not finding what you are looking for?
1995 Buick LeSabre Logo

Related Topics:

62 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buick Experts

Marvin
Marvin

Level 3 Expert

85223 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...