Go down to the local parts store and purchase a New Ignition key, Remove the old key cylinder and install the new one. This isn't really all that easy to replace. It must be drilled out to a point where you can get it to turn like you are starting the vehicle to get the pin to release and let the cylinder slide out of the steering column lightly blow and wipe this cylinder hole out till it clean with no drill shavings in it. Install the new key cylinder. Hope this helps Had to do this on Vacation in Biloxi, Miss. I'm from Texas with very little tools and I didn't have the $350 they wanted to make another key either.
SOURCE: How do I remove the dashboard from my 2000 Chevy Astro Van?
Paul is right you can go to radio shack or autozone schucks or any parts store and ask for the removal tool it cost $20.00 tops. Trust me you don't want to undo the dash as the air bag could detonate if you shorted the two wires that can control it and it could kill you.
Testimonial: "Thank you! I didn't even think about the safety aspect of removing the dash. Better leave this to the pros!"
SOURCE: location of the camshaft sensor on a 2000 chevy astro van
The sensor is in the distributor you can get it out with out pulling the distributor but its tight and has to be perfect .... pull the cap off and then the button youll see a sensor under a metal cup looking thing with a wire harness coming out of it i believe you need torks bits for the whole job if you go to any parts store and buy one then pull the cap this will make more sense.
Good luck and hope this helps.
SOURCE: 2000 chevy astro van blower
Yes it could but also check under the hood because it is a very common problem for a vaccumm line to come unhooked causing this problem. Hope this helps, Allen, swiftautorepairs.com
444 views
Usually answered in minutes!
×