Question about Plymouth Cars & Trucks

Open Question

I changed my coil pack and my crank shaft sensor but my 99 Plymouth grand voyager will not start

How do i change the cam shaft sensor

Posted by on

Ad

4 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Graham Core

  • 114 Answers

SOURCE: 1998 hyundai accent

make sure crank sensor is all the way seated care taken 10mmnut dont over tighten or you will break sensor

Posted on Sep 24, 2008

Ad

Richard Delahant

  • 1201 Answers

SOURCE: 1998 PLYMOTH VOYAGER WANT START

If your voyager is equipped with one---- change the ballast resistor, it's an oblong white ceramic block usually on the firewall, or on the inner fender well, it has 2 wire connections, one on each side.

Posted on Aug 28, 2009

mickha2

Michael Khait

  • 145 Answers

SOURCE: I have a 91 Plymouth

check fuel pump relay

Posted on Aug 16, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1996 plymouth grand voyager 3.3 does not fire have change ecm cole cam sensor crank sensor


Did you test power an grounds ? B+ to coil pack . Check for battery voltage at dark green with orange stripe wire at coil pack . No B+ voltage there you need a ASD relay - auto shut down relay !

Jan 05, 2016 | Plymouth Cars & Trucks

1 Answer

My 2000 plymouth voyager will not start and i have changed the crank shaft sensor and the plugs even the cole pack still will not start about a year ago i even did the timing belt what can i do


not sure what size motor you have? is it getting fuel? have you checked the fuses? if so there is a cam sensor that can cause a no start on the 4 cyl the 3.0 and the 3.3. hope this helps

Jan 25, 2011 | 2000 Plymouth Voyager

1 Answer

1998 PLYMOTH VOYAGER WANT START


If your voyager is equipped with one---- change the ballast resistor, it's an oblong white ceramic block usually on the firewall, or on the inner fender well, it has 2 wire connections, one on each side.

Aug 28, 2009 | 1998 Plymouth Voyager

1 Answer

1994 Plymouth Grand Voyager 3.8 eng won't start


Check primary voltage at ignition coil and fuel injectors, engine cranking, use a test lite, dark green wire with orange tracer. If no voltage, that comes from asd relay. Some makes and models if the computer doesn't see the cam and crank sensor signals, the computer won't ground the relay.
You need to do some testing.

Mar 18, 2017 | 1994 Plymouth Grand Voyager

2 Answers

I cant get spark out of the coil pack


cam sensor fires the injectors to synchronise injector pulsing with the spark at the spark plugs.. U need to probably change the crankshaft sensor (around the crank pulley) as the crank sensor is what controls the ignition spark.
hope that does it.
:)

Jan 20, 2009 | 1996 Plymouth Voyager

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

31 people viewed this question

Ask a Question

Usually answered in minutes!

Top Plymouth Experts

Marvin
Marvin

Level 3 Expert

85222 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Are you a Plymouth Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...