Question about Ford Cars & Trucks

1 Answer

My ford kuga doesn"t wanna start it makes the clicks and the dash is off i have change the battery but still

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Ford Master
  • 29,773 Answers

You disconnected the battery, so you have to have the key in the ignition when you reconnect. Now you have upset the immobilizer :>)

Tip & How-To about Cars & Trucks
Resetting a Vehicle Anti-Theft System This is how you reset an anti theft system if you have the anti-theft light on, or your car is cranking, but you have no spark.

Doing a full reset of the anti-theft system.

Disconnect both battery leads for at least two hours.
Hold the negative and positive leads together for 5 minutes to fully discharge any power.
Put the key in the ignition, but not turned on. VERY IMPORTANT!
Connect the positive lead.
Connect the negative lead in one swift movement.
Wait 15 minutes for the system to fully reset.
Posted by Andrew... on Jan 14, 2018

Resetting Vehicle Anti Theft System

Posted on Jul 24, 2018

Ad

6 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

kevin butler

  • 291 Answers

SOURCE: turn key to start and it wont start, just makes a

if it is standard shift then check the clutch disable switch.... if auto then check neutral safety switch on transmission....confirm power to the starter itself.. report back

Posted on Oct 06, 2009

Anonymous

  • 1 Answer

SOURCE: My 1997 Ford f150 won't start. It makes a clicking...

I have the same problem with my '97 f150....same clicking noise and wont start. I replaced the sylanoid..(however you spell that)......then I replaced the battery...then I replaced the starter...I checked all the fuses...still doing the same thing...

Posted on May 31, 2010

redds55

Ricky Peters

  • 2620 Answers

SOURCE: 2001 Ford focus se automatic

First check battery cables for corrosion and bad connections check the battery voltage you should have 12-13 volts at the battery then see what you have at the starter where the battery cable is connected.You should have at least 12 volts there too.If you don't have 12 volts at the battery replace battery.

Posted on May 23, 2011

Strattrpt

Dave

  • 159 Answers

SOURCE: 1991 Lexus 400 - engine

This could be a problem with your starter -- if you know a bit about engines try tapping the starter with a wrench while someone turns the key (not too hard so you don't damage it if this is not the problem). If your starter motor has a "dead spot" tapping it can get it to free itself up and might help. If this DOES help, please consider changing your starter so you don't have to keep going through this problem. If tapping the starter does not help, it might just be dead altogether. If you are doing your own work, try replacing it and hopefully that should help. If you are not going to do your own work on the car, a mechanic should be able to give you a proper diagnosis and repair the issue without too much hassle.

Posted on Jun 01, 2011

newimagecon0

Paul Musaelyants

  • 34 Answers

SOURCE: 2014 ford kuga wont start 2 new batteries later back in garage still not going

It should be warranty get v your money back it can be any thing

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/paul_0aa451e2c4466dbf

Posted on Nov 07, 2014

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 12 REG ford Kuga is have starting problems. The display shows, press clutch to start.


I would let Ford back that up. Since u brought to them already and your problem wasn't resolved speak to the service manager (as a paying consumer!) I've seen it a million times.

Aug 11, 2017 | Ford Cars & Trucks

1 Answer

My fuse keeps blowing under dash when I turn my ignition to start car 2008 Ford Crown Victoria Police


Make sure what fuse it is first. You might also wanna look at any fuses and fusible links under the hood.

Jan 25, 2017 | Ford Cars & Trucks

1 Answer

My ford kuga has no electrics and will not start nor does the central locking system work !! Have you any idea why?


First check the battery voltage with a multi meter the voltage should be around 12.53 v if it is lower then 12v the cars Bsi unit wont wake as the Canbus electronic system is power hungry.

If the Battery voltage is correct then check the main fuses under the engine compartment and then check the interior fuses for a possible blown fuse. As the main system function are not working then the cause will most certainly be a blown higher amp fuse 30 amp / 60 amp which protects the starting and charging circuits.

Sep 05, 2015 | 2011 Ford Kuga 2.0

1 Answer

Clicking under dash


Maybe this battery with problem, change a new one. or you can diagnostic your car at first. FORD VCM is the best tool for ford cars.

Apr 27, 2013 | 2008 Ford Taurus

1 Answer

2006 ford explorer wont start and lights wont work on outside or inside. I hear a clicking sound on the inside under dash. The battery is fine checked it what else could it be?


Since your battery is fine and you hear a clicking sound there is a problem getting the power to the rest of the systems on the vehicle. That clicking noise is your starter that doesn't have enough juice to get it going. This may be something as simple as dirty or rusty terminals, a bad connection between the terminals and the cable or even bad battery cables. The ifrst thing you should do is take off your battery terminals and clean them clean them and also while you're at it take a look at those cables to make sure they aren't obviously damaged. Reconnect the terminals to the cables and battey and see what happens. If it doesn't work, you'll need to have a professional look at it.

May 13, 2011 | 2006 Ford Explorer

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

312 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

Marvin
Marvin

Level 3 Expert

85216 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

gerry bissi

Level 3 Expert

4388 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...