How do I remove the engine oil dip stick tube on a 2000 Chevy venture

SOURCE: jump start 2000 venture

In order to reach the negative terminal to the battery in a 2000 Vebture (I have one) you must first remove the fuse housing. The fuse housing is a large black box that sits atop the battery. There os a single bolt that holds it in place located in fron of the battery bolted into the lip of the motor bay. Unscrew this, then unhook the fuse housing from the cross bar running from the back roght to the front of the motor bay. This is a tight fit so watch your knuckles. Once the fuse housing is out, the negative terminal is located on the backside of the battery. It is a tight squeeze black is negative, red is positive.

SOURCE: transmission fluid leak

trans filter might be clogged

SOURCE: my 1979 chevy bonanza 4wd.

turbo 350? if so it can be that it is over full or sometimes the gears that are in the tranny that sling the tranny fluid up will get bent or worn and will sling oil to the wrong spots and that will cause your gears to get hot and expand and that can cause it to shoot oil up your dip stick

SOURCE: how do you reset power sliding door on 2000 chevy venture

there should be information in your owner manual telling you how to do it if you have miss place your owner manual try this website to see if you can down load one for your car its www.edmunds.com and i hope i was able to help you Michigan Man

SOURCE: trans oil is leaking out the dip stick tube on my

you will have to replace its oil seal