The wires come out above the brake pedal assembly. the keyless entry module mounts here also you have to remove the pedal assembly to get to this area.
SOURCE: Replace starter on 1992 GMC Sierra pickup truck
First thing unhook positive battery cable, unhook main cable on starter selanoid and small wire on selanoid (there may be 2 small wires) There may be a bracket on front of starter that has to be removed, and then the 2 main bolts that hold it to engine block and it should come out.
SOURCE: 99 gmc jimmy sle keyless remote and security issue
Hi: From my experience the security issue is easily solved because hitting the factory key FOB lock button is the only way to activate it, hitting door lock button will not activate it. When installing a remote starter no wires are cut usually, just spliced into which means... make sure that where wires were spliced they are taped. If you have the original factory key FOB use a quarter and pop apart, replace the battery, key FOB should have retained its factory setting if your lucky, if doesn't work go to internet search and find programming procedure. Hope this helps... please rate suggestion...ty
SOURCE: wiring diagram 2003 GmC Sierra
I need wiring digram for GMC 2003 SIERRA . I have the left head light working fine but the right I have no power to it. I have checked the fuses and relaysand so far have not found and broken or frayed wires.
SOURCE: Where to find diagram to install whole rear brake lines
I don't know about a diagram. Just buy some 1/4 inch brake line and run it as close to the original as you can.
Check Battery voltage 213 views
Usually answered in minutes!
×