Cars & Trucks Logo

Related Topics:

How to remove the second row seats in carnival

5 Related Answers

Anonymous

  • 2 Answers
  • Posted on Jan 07, 2009

SOURCE: removing the 2nd and 3rd row seats

3rd row, you simply pull the lever which makes the back fold down and then grip the handle located on the bottom and pull toward you slightly hard. They are heavy so it seems like they aren't coming out, just pull hard. second row, you flip all the way up and push with them standing up and they come unhooked. Good Luck! I didn't have any problems, except they are at least 50+lbs!

Ad

Volvo780

  • 6 Answers
  • Posted on Mar 14, 2009

SOURCE: How can I remove front row seat headrest?

Most volvo headrest can be removed by releasing the catches which are on the back of the headrest on some models and on the front on others I believe on 960 they are on the back. To release the seat on a 960 look where the shafts should be then follow it down on the back where the seat back top stops then goes in press around that area you should be able to find the catch there pull up on the headrest while releasing the catch you have to do this on both sides. The headrest should come off this also works on 740 and 760 series the volvo 780 is a different story the only way to get the headrest off on that is to disassemble the seat

Anonymous

  • 41 Answers
  • Posted on Jun 09, 2009

SOURCE: Remove seat from second row in Honda Mini Van 2007

on the passenger side feel under the seat and there is a lever that pulls toward you as you stand at the sliding door.

First, raise the armrest, then lower the back all the way forward. Then remove the headrest sit it out of the way and while pulling the lever under the seat towards you, lift up the seat from the back so it tilts forward. When it is standing on its "nose" lift first one side shifting it either forward or backwards to clear the rod on which it is hooked. Do the same with the other side of the seat and then lift it out. Installation is the reverse of removal.

The other seat is much the same, though sometimes the lever is a little different but in the same place.

Good luck,
bob

Anonymous

  • 11896 Answers
  • Posted on Aug 24, 2009

SOURCE: need instructions to remove second and third row seats

On the bottom of the seats, there is a handle on each side. Lift up both handles at same time and have someone else lift up and pull out the back bottom of the seat and it will pull out.

ourhowse

Dar

  • 2007 Answers
  • Posted on Dec 27, 2009

SOURCE: 07 Expedition second row seat head rest cover plate removal

There should either be a little button at the base of the headrest that you push, or a small hole in the rod part, with a hole in it. Push in the hole with a pen, or a small nail to release the headrest.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

2006 Pontiac Montana. Can I remove 1 of the middle seats?

Question edited for clarity.
Question moved to model category.

Air bags only deploy if there is weight on the seat. Yes they are removable.

Pontiac Montana SV6: how to remove second row seats ...

JustAnswer https://www.justanswer.com > Pontiac Problems
Apr 21, 2015 - HI, Attached at bottom of the answer is directions to remove the seats - below is procedure to disable airbags before beginning work ...

1 answer · Top answer: HI, You can but you have to know the resistance of the airbags, which unfortunately gm doesnt ...

Removing The Bucket Seats - Pontiac Montana SV6 2008 ...

ManualsLib https://www.manualslib.com > ... > Owner's manual
1. Pull the nylon strap or lift the recline lever. · 2. Press back on the seatback until it is in the desired. position · 3. Let go of the strap or lever.

Removing Third Row Seat From A Pontiac Montana An Easy ...

osvehicle.com https://www.osvehicle.com > removing-third-row-seat-...
Mar 29, 2023 - The most straightforward way to move the furthest back seat is to remove it from the back door and slide it out. Uncomplicate The Task: Removing ...

..
1helpful
1answer

Pleas how do I remove the plastic trim to get to the RHS second row seats seat belt? 100 series Toyota landcruiser

Hi. Thanks for your question. For assistance on plastic trim on 100 series Toyota Land cruiser you can visit https://www.reliable-store.com and download the entire workshop manual which includes all the information along with the diagrams for better understanding. Good day!
0helpful
1answer

How do I remove second row seat

If its on rails, pull the handle and slide it off. If no rails pull really hard from the top or kick from the back. Check for bolts behind and underneath the carpet, it may have a couple fasteners. You can really beat on a seat and it will take it. Sometimes that's what you gotta do.
0helpful
1answer

How do I remove second row seat?

What type of vehicle are we talking about?
0helpful
1answer

I have a 2001 chrysler voyager where is the blend door actuator located and how to remove it

its in the HVAC heater core box,
how to remove it is a very long answer.
read the FSM on HVAC
or login to alldata.com see HVAC chapter, and read. it.
anyone can, not just me.

i see this on line,.
  1. Disconnect and isolate the battery negative cable.
  2. Remove first row seat.
  3. Remove second row seat.
  4. Remove sliding door sill trim panel.
  5. Remove quarter trim bolster.
  6. Remove D-pillar trim panel.
  7. Remove first row seat belt anchor.
  8. Remove second row seat belt anchor.
  9. Remove screws attaching quarter trim to quarter panel from bolster area.
  10. Remove screws attaching rear edge of quarter trim to attaching bracket.
  11. Disengage hidden clips attaching front of quarter trim to quarter panel rearward of sliding door opening and at locators.
  12. Remove quarter trim from quarter panel.
  13. Disconnect speaker wire connector on LWB quarter trim panel with rear air conditioning.
  14. Pass second row seat belt through slot in trim panel on long wheel base vehicle.
  15. Pass first row seat belt through slot in trim panel.
  16. Remove quarter trim panel from vehicle.
  17. Remove the two screws that secure the top of the quarter trim panel attaching bracket to the quarter inner panel.
  18. Remove the screw that secures the back of the rear heater-A/C unit housing to the right D-pillar.
  19. Remove the screw that secures the front of the rear heater-A/C unit housing to the right quarter inner panel.
  20. Carefully pull the top of the rear heater-A/C unit housing away from the right quarter inner panel far enough to reach between the rear heater-A/C unit housing and the quarter inner panel to access the blend door actuator.
  21. Remove the two screws that secure the blend door actuator to the rear heater-A/C unit housing.
  22. Pull the blend door actuator away from the rear heater-A/C unit housing far enough to disengage the actuator output shaft from the blend air door pivot.
  23. Raise the blend door actuator far enough to access and disconnect the rear HVAC wire harness connector for the actuator from the actuator connector receptacle.
  24. Remove the blend door actuator from between the rear heater-A/C unit housing and the quarter inner panel.
0helpful
1answer

2nd row seat of my ford excursion seat went down but I can't get it to release and return to an upright position

cabling inside the seat is faulty ,,,,, nasty problem as you have to remove upholstery to repair it ,,,,,
9helpful
2answers

I want to make my 1999 Mercury Villager Sport into a cargo loader, with just the front seats kept and the rest of the back empty. How do I remove the other 3 seats? So far, I can't get any of them to budge...

the middle seats come out easily. There are 2 handles you have to lift up on each of the bucket seats, they are in the front of the seat down by the seat tracks. After you lift them, tilt the seat upward in the front and rotate them backward. Then lift out of the hooks. Each seat is held down by 4 hoks.

The 3rd row seat is not designed to come out xcept by a technician. It does slide forward all the way up to the front seat. It has a sliding seat track.
First, lift the T handle under the seat cushion on the left front side of the seat. This will allow you to lift the seat bottom up all the way to lcok in the full up position.
Then, lift the lever on the same side of the seat and slide the seat forward. It will stop in 4 places.
Rear -Rear
6 inches forward of that.
another two ft to the second row seating position
full frward against the front seats.

Pleae rate as fixya if this helps.

c4253aa.gif Seat —Third Row Bench Removal
sxv~us~en~file=ani_caut.gif~gen~ref.gif CAUTION: Removal of the third row bench seat requires more than one technician.
  1. Remove the second row seats. For additional information, refer to Seat—Second Row .
  1. Remove the floor mats.
  1. Lock the seat cushion in the upright position.
    1. Lift the handle to release the cushion.
    1. Lock the seat cushion in the upright position.
0235766.gif
  1. Move the third row bench seat to the second row position.
    • Lift the seat track release handle.
  1. Remove the two bolt covers.
  1. Remove the two seat track front bolts.
  1. Remove the four seat track rear bolts.
    1. Position the rear seat cushion floor cover aside.
    1. Remove the four seat track rear bolts.
  1. Remove the third row bench seat.
4helpful
1answer

Removing the 2nd and 3rd row seats

3rd row, you simply pull the lever which makes the back fold down and then grip the handle located on the bottom and pull toward you slightly hard. They are heavy so it seems like they aren't coming out, just pull hard. second row, you flip all the way up and push with them standing up and they come unhooked. Good Luck! I didn't have any problems, except they are at least 50+lbs!
Not finding what you are looking for?

1,862 views

Ask a Question

Usually answered in minutes!

Top Kia Experts

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Kia Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...