2005 Kia Rio Logo

Related Topics:

Margie Mejica Posted on Jul 01, 2018

Open clip holding the pcv on 2005 kia rio - 2005 Kia Rio

5 Related Answers

Anonymous

  • 1 Answer
  • Posted on Jun 24, 2009

SOURCE: My 2003 Kia Rio Cinco back hatch latch handle is

We had the same problem.
I took out the bolts outside, then crawled into the back area of the car, and took a screw driver, and slid it along the inner hatch catch, and found the safety latch and released the hatch. Then I took the inside off, and disconnected the handle device from the inside. It was rusted, and broken. I went to Kia, and bought a new one and reinstalled, after greasing the new one up. Took me a while, but they wanted 280.00 in labor, so it was well worth it.
Just be patient and go slow. A good metric socket set will be the best thing, with a regular and phillips screw driver.
Good luck
David

Ad

Anonymous

  • 1 Answer
  • Posted on Jul 10, 2009

SOURCE: 2005 Kia Rio - changing the driver side parking light

i like to sea the personal earth

airjoc

Rob Sinbad

  • 709 Answers
  • Posted on Oct 21, 2009

SOURCE: replacing the starter on my 2005 Kia Rio

1st disconnect your battery (Tools that I needed. 14mm socket for mounting bolts, 13 mm socket and a drop light. You need to jack up the front end pretty high both sides and put jack stands under each side. (extra precaution I put wood under the wheels because I don't like getting crushed. Slide under your car (bring a drop light) Look up and see your oil filter. Now look left and you will see the starter motor (oh yeah there is a pain in the as s bracket in the way) remove that bracket (14mm should be right) and then remove the bottom bolt of the starter (you may need a long socket extension here 8"?) The next set of bolts you have to get from up above that come from the other side. Get your light in there the one on the left side is easiest so get that last. The one on the right side will have a wiring harness running really close to it. Force your 14mm socket onto it with a 4 in extension. Back the bolt off till it spins a free but leave it in the hole. Remove the second one until you hear the unit fall. When putting the two bolts from the other side in, don't reef on them to get them super tight. Save your core so you can get some money back. Good repair manuel will cost 20 bucks, Haynes auto repair at your local auto parts store. good luck

Testimonial: "Fast Comeback. I think I will become a member here."

Anonymous

  • 564 Answers
  • Posted on Mar 27, 2010

SOURCE: 2005 Kia Rio check engine light with no other symptoms

first you will have to find out what the light is all about it could be something as simple as a bad airfilter or something more complex like an o2 sensor you can go to auto-zone and they will check the light for free and tell you what the problem is once you do this if you like send me a message and ill tell you how to rectify the problem hope this helps you.

Testimonial: "thanks!"

Anonymous

  • 127 Answers
  • Posted on Jun 28, 2010

SOURCE: 2006 KIA Rio battery problems

You have already figured it out but don't know the answer <(^_^)> . It's the alternator.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Doors not opening

I have a 2005 Kia Rio. The passenger door would not open (using inside or outside handles). Found out that one of the three bolts holding the door lock became loose just enough that the head of the screw rubbed against locking mechanism. Had to kick the door (from inside) open. It worked. Replaced screw and all is well.
0helpful
1answer

How to remove front bumper

Remove screws in wheel wells holding bumper to inner fender, and fender. Then remove screw holding the splash guard to the lower bumper cover. Finally, remove screws holding the bumper cover to the core support on each side of the grill, and possibly the outer corners, near the head lamps. There will be some pin/clips retaining the bumper cover still, but separate easily without tools.
1helpful
1answer
0helpful
2answers
0helpful
1answer

Hi, my kia rio will randomly just over rev to 6 rpms

sounds to me like your idle speed control sensor is going bad.
0helpful
1answer

How do I get the inside door panel off of a Kia Rio 2006 drivers side door

REMOVE ALL SCREW AROUND PANEL DONT FOEGET THE ONES THAT HOLD THE ARMREST, THEN PULL ON THE PANEL ITS HELD ON BY CLIPS, THEN UNPLUG ALL SWITCHES.
0helpful
1answer

Wont stay tight wiper arm

The wiper arm has teeth on it that hold it the spindle, those teeth wear out and let the wiper arm flop all over. You need a new wiper arm, if it is under warranty I'd take it in, if not changing awiper arm is easy. I've seen this on several kias, and also on other foriegn cars. It is just a bad design in my opinion.
0helpful
1answer

Changing the passenger seat belt clip

Remove the 4 bolts holding the seat to the floor and you'll have the clearance you need
Not finding what you are looking for?

64 views

Ask a Question

Usually answered in minutes!

Top Kia Experts

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Kia Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...