SOURCE: 1999 dodge cummins 2500 front axel seals
you need to pull off wheels,brakes, rotor /unit hub bearing, both axles and intermediate shaft, as well as the vac disconnec ton the front axle tube. if only the right side leaks then only then only pull the right axle and intermediate shaft and vac disco. it is a trick with a miller tool to replace the seal. the left side seal is inside the diff and the carrier has to come out to replace it. pete
SOURCE: 1997 dodge ram 2500 van need to remove rear door latch linkage
Assuming you are reffering to the push rods. When engine is operating these rods spin around. They ar stuck, spray some liquid lock wrench into the rods, wait a couple days then try turning them by hand.
SOURCE: How do I remove the headrests from the front seats
There should be a small button on top of of the seat,
where the headrest bar go's in. Press and hold the
button while you remove the headrest.
Hope this helps. Good luck.
SOURCE: ho do i remove the front seats in my 97 honda
only 4 bolts 2 in front 2 in back,,
one of the back bolts on each seats have a cover pop it up and off with a flat head
driver side will have a wire!!! unbolt it and lay it back to unplug wire.
55 views
Usually answered in minutes!
×