I'm trying to fit reversing camera but don't know which wires to use .Thanks.
Look at reverse globe socket the wire that goes to the centre of the globe is most likely positve and the other wire on the side of the globe is car body. Or get a 12v dc probe from an auto shop and test the wires at reverse light globe connector.
SOURCE: The passenger wing mirror of my Citreon Xsara,
if you press the outer edge,you can move the mirror glass to the central position so that you can then adjust it electrically.it will click as you move it.......by the way citroen and peugeot ARE the same,chassis/engines/electrics,in fact EVERYTHING bar the outer skin.ONLY CHEAPER.......and depreciate more rapidly.....
SOURCE: I have a citreon xsara Picasso 52 plate the
If the switch is working & there is voltage coming from it when reverse is selected, it may be the wiring between the switch & bulbs or possibly a bad connection / earth at the bulb terminals.
If it looks like a wiring issue I would check the wiring in / around the gearbox & engine bay for chafing.
SOURCE: remove the front drivers side strut from a citreon xsara picasso 1.6
jack up both sides of vehicle ,remove the wheel and undo the pinch bolt that holds the leg into the steering assembly ,tap it down to free it away the undo the top 3 bolts and away it comes ,do not change the spring yourself ,it needs special tools and know how ,do not undo the big nut in the middle of the top of the leg either ,it will fly apart and can easly cut you hand off or your head .TAKE IT TO A GARAGE TO HAVE THE SPRING CHANGED
104 views
Usually answered in minutes!
×