2004 Saturn ION Logo

Related Topics:

A
Anonymous Posted on Jun 02, 2018

How do I install the Windshield wiper motor in aew004 Saturn ion

I need torque specs and motor placement

5 Related Answers

Anonymous

  • 64 Answers
  • Posted on Jan 15, 2009

SOURCE: windshield wipers in front wont work but rear wipers work

Hi! U need to check the switch and the wiring circuit that controls the motor.

Ad

Anonymous

  • 10 Answers
  • Posted on Jul 21, 2009

SOURCE: need to know how to replace the windshield wiper motor

First remove the wiper arms.Then remove the screws that hold the black plastic grill, you will see the motor.You will need then to disconnect the wiper arm transmission linkage from the motor, then remove the three bolts holding the motor on, dont't forget to disconnect the electrical connector from the motor.Install in reverse order.Good luck.

Anonymous

  • 106 Answers
  • Posted on Feb 05, 2010

SOURCE: How to take off the Windshield Wipers Arm on a

At the end of the wiper arm where it attaches there will be a plastic cap over a nut.Remove the plastic cap and remove the nut and you will be able to remove the wiper arm.I hope this helped.

johnjohn2

Johnny Brown

  • 5763 Answers
  • Posted on May 07, 2010

SOURCE: 2000 Saturn Ion windshield wiper quit where is

i dont think the ion was made in 2000, they started making them in 2003, heres a diagram of a 2003 ion fuse box and the wiper fuse location.hope this helps,858c93e.gif

joelman198

  • 6 Answers
  • Posted on Sep 18, 2010

SOURCE: windshield wiper linkage 2005 saturn ion

Their is a solution to the common saturn ion windsheild wiper problems. A new improved version of the wiper linkage is available and it has aluminum pivots instead of plastic. The plastic pivots were the weekest point of that linkage. I bought one oat this link and put it in myself. Awesome product

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

2003 Saturn ion the windshield wipers stoped working but I can still here the motor when I cut them on

Linkage problem . Access the motor and see if the linkage came off . Watch this video , may help you out . I know it's not a saturn ,still a GM vehicle . Pontiac G6 Wiper Fix and other GM cars
0helpful
1answer

My 2005 Saturn ION windshield wipers won't come on when I try them

Did you check for power reaching the motor? Switch? Motor?
0helpful
1answer

Where is the wiper motor on my 1999 GMC Yukon?

Windshield Wiper Motor
Removal & Installation
To Remove:


  1. Remove wiper arms.
  2. Remove weatherstrip from cowl.
  3. Remove two cowl vent grille panel screws.
  4. Remove windshield nozzles and hoses.
  5. Remove three cowl vent grille panels.
  6. Disconnect windshield wiper motor electrical connector.
    NOTE: Do not remove crank arm from windshield wiper motor.

  7. Loosen nuts that attach the drive link brackets to the crank arm.
  8. Remove wiper motor crank arm brackets.






    gm-06-00-1079.gif



  9. Remove three bolts and windshield wiper motor from vehicle.

To Install:


  1. Install windshield wiper motor and three bolts.

    • Torque to: 62 in lbs. (7 Nm)

  2. With right side linkage closest to the windshield wiper motor, install drive
    link brackets to wiper motor crank arm.

    • Torque nuts to: 44 in lbs. (5 Nm)

  3. Connect electrical connector.
  4. Install nozzles and windshield washer hoses to cowl vent grille.
  5. Install three cowl vent grille panels and screws to vehicle.
  6. Install weatherstrip to cowl.
  7. Install wiper arms.


prev.gif next.gif
0helpful
2answers

I have one wiper that does not work the other stops in the middle of the windshield how can i fix them

The motor could be bad, but it's likely that the ball joint connections under the hood area under the cowl have become disconnected for the one windshield wiper arm.

The connection of the arm that moves should be checked for being at the correct angle for parking.
Removal & Installation 2000-03 Wiper Motor and Bushing Replacement L4-2.2L (Vin F) & V6-3.0L (Vin R) To Remove:
sat_car_22_fw-wpr_arm_xp.gif

  1. Before servicing the vehicle refer to the precautions at the beginning of this section
  2. Remove the wiper arm finish caps
  3. Mark both wiper arm positions on the windshield by using a wax pencil or tape
  4. Remove or disconnect the following:
    • Wiper arm retaining nuts and washers
    • Wiper arms
    • Weather-strip at rear of hood sat_car_22_f_wshd_wthr-strp.gif

      sat_car_22_f_wshd_gril_nts.gif

    • Grill nuts from base of wiper arm shaft
    • Grill
    • Electrical harness connector from the wiper motor
    • Wiper motor retaining bolts
    • Wiper motor assembly from plenum area
    sat_car_22_f_wpr-mtr_asy.gif

    sat_car_19_wpr_mdl_rmv.gif

  5. If replacing wiper module bushings remove the steel bushing first then the rubber grommet
  6. Remove the wiper motor from the transmission assembly
To Install:
  1. Install or connect the following:
    • Wiper motor to transmission assembly NOTE: If the wiper module bushings were replaced install the rubber grommet first then the steel bushing.
    • Wiper motor to plenum area
    • Wiper motor retaining bolts; torque to 44 lb-in. (5 Nm)
    • Electrical harness connector to the wiper motor
    • Weather-strip at the rear of hood
    • Grill
    • Grill nuts to the base of the wiper arm shaft
  2. Install the wiper arm assemblies at the marks made during removal or at the PARK position if a new wiper motor is installed
  3. Install the wiper arm retaining washers and nuts; torque to 9 lb-ft. (12 Nm)
  4. Install the wiper arm finish caps
  5. Verify correct wiper system operation
prev.gif next.gif
0helpful
2answers

2000 Saturn Ion windshield wiper quit where is fuse box? Owner has no manual. Thanks

i dont think the ion was made in 2000, they started making them in 2003, heres a diagram of a 2003 ion fuse box and the wiper fuse location.hope this helps,858c93e.gif
1helpful
1answer

How to take off the Windshield Wipers Arm on a Saturn Ion

At the end of the wiper arm where it attaches there will be a plastic cap over a nut.Remove the plastic cap and remove the nut and you will be able to remove the wiper arm.I hope this helped.
5helpful
3answers

Windshield wiper linkage 2005 saturn ion

Their is a solution to the common saturn ion windsheild wiper problems. A new improved version of the wiper linkage is available and it has aluminum pivots instead of plastic. The plastic pivots were the weekest point of that linkage. I bought one oat this link and put it in myself. Awesome product
0helpful
1answer

Fuse size for windshield wipers

20 amp or 30 amp would do
Not finding what you are looking for?

230 views

Ask a Question

Usually answered in minutes!

Top Saturn Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Saturn Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...