Question about 2000 Ford Windstar

1 Answer

How do I remove the steering wheel on a 2000 ford windstar?

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Ford Master
  • 1,001 Answers

With the help of service and repair manual with diagram you can solve your problem easily and you can get the manual from the given link

Posted on May 08, 2018


6 Suggested Answers


6ya staff

  • 2 Answers


Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017


Carlos Rojas

  • 119 Answers

SOURCE: 2000 jetta need to remove steering wheel

This is not an easy procedure, especially since you've never done it before. With the wheels in the straight ahead position, look at the back of the steering wheel, you'll see two holes. One at 9 o'clock and one at 3 o'clock. You stick a small flat blade screwdriver in the first hole and you pry on the retaining spring while gently pulling on the airbag until it releases. Repeat on the other side. I'm a professional mechanic and the first time I did it, it took me over a half hour to figure it out. Now I can do it in less than a minute. Might want to take it to the dealer.

Posted on May 21, 2008


  • 66 Answers

SOURCE: how do you remove day night mirror from ford windstar

push up and give it a shape blow with your other hand.

Posted on Jan 04, 2009

Zachary Kloefkorn

  • 156 Answers

SOURCE: squeaking when turning steering wheel

that would be your power steering. The fluid may be low.

Posted on Feb 23, 2009


  • 116 Answers

SOURCE: 1998 Ford Windstar Transmission to 2000 Ford Windstar

while it is possible to perform that swap, the newer 2000+ transmissions will have updated internals and such.

so will it work............. yes.

is it

Posted on Apr 11, 2009


  • 270 Answers

SOURCE: power steering pump on a 2001 ford windstar

There is a special tool for that. It should be available at most auto parts stores.

Posted on Oct 17, 2009

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

How do you remove steering wheel cover and switch tumbler on 2000 ford windstar

My friend is a part time mechanic he gets his
solutions from he gets from their every single detailed info, instructions, wiring/electrical/fuse diagrams, error codes, torque specs, troubleshooting, transmission etc. everything on all vehicles, and manuals like service, repairs, parts, owner's, operations, maintenance etc.
U can get help from there
there is a girl at chat she can help you

Mar 25, 2018 | 2000 Ford Windstar

1 Answer

How do I remove front dash on 2000 Ford Windstar

that is a big job.......the radio,hvac controls, all trim,instrument cluster and all the electrical connectors to the main wire harness all has to be removed and the steering assembly dropped down.

Feb 23, 2015 | 2000 Ford Windstar

1 Answer

What would cause key won't turn, steering wheel locked, car in park, brake hard

It sounds like the steering lock has gone hard due to turning the wheel after key is out, turn the key and steering wheel at the same time and see if this releases the lock. Hope this helps

Aug 28, 2014 | 2000 Ford Windstar

3 Answers

Where on a 2000 windstar is the fuse box?

Hi, The fuse panel is located below and to the left of the steering wheel by
the brake pedal. Remove the panel cover to access the fuses.
To remove a fuse use the fuse puller tool provided on the fuse panel cover.

Fuse details are in your owners manual beginning on page 182.

You can get a free copy here:

Jan 12, 2011 | 2000 Ford Windstar

1 Answer

How do you change a rack and pinion on a ford windstar

This is a repair that should not be attempted by a novice! Put the van in the air,remove the front wheels,remove the cotter keys from the tie rod ends and remove the nuts and separate from the spindle,Remove the Power steering lines from the rack and pinion unit,Remove the single bolt that attaches the rack to the steering shaft,Remove the two large steering rack mounting bolts from the engine/transaxle cradle, with support under the engine/transaxle cradle remove the rear mounting bolts slowly lower the cradle slowly to gain access to remove rack assembly and reverse for installation. NOTE: Install new seals on the power steering lines and when removing outer tie rods from the rack count how many turns it takes to remove the end and put it back on the same amount of turns. Refill the system with proper fluid and have the vehicle Front end aligned!!!!!!!!

Aug 27, 2010 | 2000 Ford Windstar

1 Answer

1999 Windstar has the air bag light on the horn is not working and the controls on dash (gas temp etc) just goes wild flopping everywhere.

under your steering wheel, is a part called a clock spring which controls your airbag/horn........removal of steering wheel is necessary
it looks like a round thing with multiple colored wires coming out of it.
the replacement is available at your local Ford dealer

PS: disconnect battery first! you will need a steering wheel puller to do the job.

Jul 21, 2010 | 1999 Ford Windstar

1 Answer

I need a print showing how to remove a steering wheel on a 2004 ford windstar van

prise out the centre of steering wheel you will find an hexagon nut

Nov 11, 2009 | 2004 Ford Windstar

1 Answer

Buttons on steering wheel do not work

have your mechanic check you STEERING WHEEL control module its the unit the control the function on the steering that communicate with veh ecm

Aug 07, 2009 | 2000 Ford Windstar

1 Answer

My windstar 2001

Check the clock spring in the steering column (contact assembly between column and steering wheel, wheel removal required) Ford clock springs are known to fail.

Hope this helps.

Jun 19, 2008 | 2001 Ford Windstar

Not finding what you are looking for?
2000 Ford Windstar Logo

Related Topics:

49 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts


Level 3 Expert

85222 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

gerry bissi

Level 3 Expert

4388 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides