Im starting to think maybe there is a ***** wire somewhere or something
Cud b worn module tu..but inspect harness for fouled wires w patience n safety
ATC fuse 20 amp ? Power to the ATC control module & encoder motor . Shorted circuit in electrical wiring to one of the componets listed above . Do you know what a electrical diagram is ? How to use a DMM - digital multi-meter to test electrical circuits ? Free wiring diagrams here http://www.bbbind.com/free-tsb Enter vehicle info year , make , model an engine size. Under system click on driveline / axle . Under subsystem click on transfer case controls . Click the search button ,then the blue link. First link / first diagram ,top right . ATC fuse - orange wire to encoder motor an atc control module . One of these has a short to ground probably .
SOURCE: 2000 chevy silverado z71 installed new motor-wont start
well are you getting anything give me a starting place
SOURCE: 03 Chevy Tahoe Z71 - 4wd not functioning
my son has one and his did that and it was a fuse he put a new one in and it is working good now
SOURCE: 2001 GMC Z71 4 WD
Looks like i fixed it. I took the selector switch apart and cleaned the contacts and all is good
Thanks Steve
SOURCE: Hi & good evening, I have a 2000 chevy
I would agree with you on the ignition switch. When it doesn't want to start, check the small wire on the solenoid to see if you are getting power from the ignition switch when it's turned to the start position. If not, I'd say it's the ignition switch. If not, could be a bad solenoid.
298 views
Usually answered in minutes!
×