How can I add clutch fluid to my 2005 pt cruiser? I can't find the reservoir.

SOURCE: power steering fluid PT Cruiser

power steering fluid or dextron 3 trans fluid

SOURCE: transmission fluid

I assume u found the dipstick to check the fluid level? Use a funnel to add fluid at the dipstick tube, slowly, while engine is running. Shift thru the gears several times, recheck level, don't overfill.

mike loshbough

• 1011 Answers
• Posted on Jan 25, 2009

SOURCE: where is the crank sensor located on 2005 chrysler pt cruiser?

the crank sensor is located on back right side of engine by were the trans. bolts up.is the no start when could or hot?

SOURCE: How do I check the clutch fluid to a 1999 Mercury Cougar 4cyl

The brake master cylinder reservoir has a separate chamber and is used to supply the hydraulic clutch system. So make sure master cylinder reservoir is full.

http://i253.photobucket.com/albums/hh43/chuck943/M1601026.jpg

Here is a pic of the system.
1. Brake master cylinder reservoir
2.Clutch master cylinder
3.Clutch slave cylinder with integrated release bearing

mike loshbough

• 1011 Answers
• Posted on Jul 31, 2009

SOURCE: 2005 pt cruiser misfire low rpm

Have your plugs and wires checked for replacement:)