Can backscatter see inside you? - Cars & Trucks

To clean the inside of an Amish fireplace, you can try the following steps:

1. Remove any loose debris: Use a fireplace shovel or broom to remove any loose debris, such as ashes or wood chips, from the inside of the fireplace.
2. Vacuum the inside of the fireplace: Use a vacuum with a hose attachment to clean the inside of the fireplace, being careful not to damage any components or wiring.
3. Wipe down the inside of the fireplace: Use a damp cloth or sponge to wipe down the inside of the fireplace, including the walls and floor. You can use a mild detergent or fireplace cleaner to help remove any soot or grime.
4. Check the flue and chimney: If your fireplace has a flue and chimney, you should also clean these components to ensure that they are free of any debris that could block the flow of smoke or gases.

If you are unable to access the inside of your fireplace due to the rivets on the back, you may need to remove the rivets in order to clean the inside of the fireplace. To do this, you can use a drill or punch to remove the rivets, being careful not to damage the fireplace. Once you have removed the rivets, you can follow the steps above to clean the inside of the fireplace.

If it opens from outside the mechanism came apart for the inside release. Need to get inside the door to determine what problem is. Remove inner door panel. Look inside door for a loose rod possible a broken clip

Best guess is the linkage (cable) on the inside of the door frame is no longer connected to the inside door handle. You will need to take the door apart, and hook the cable back up on the inside of the door.

You need to remove the door trim to expose the inside mechanism that opens the door from the inside, look for a broken cable or a missing link to the inside handle, your problem will be there.

I don't know what kind of car or truck you have, but I had that same thing happen a several times.
You likely have a inside door latch theat is messed up.
The last one I had , the problem was a tiny spring, (hardly much bigger that the coil spring inside a ball point pen), had fallen down inside the doort and was lying on the bottom of the inside of the door.
You might be needing a new or used door latch.
If you do not take it to a body shop and have them open it for you, you will most likely need to "tear" the inside door panel apart and take a good flashlight and try to "trip" the door latch through the holes in the metal door that are inside the door panel.
You may find this really hard to do, and it may take you many hours of trying.
This has been my experience, and I've had to do this about 5 times in 25 years.
You would eventually need to get a used inner door panel to put back on the inside of the door.
Be blessed.

Click the link below :----http://wikisolutions.blogspot.in/2012/02/get-free-answers.html

The inside door handle could be broken, or the rods that connect the inside handle to the door lock mechanism could be disconnected. You will need to remove the inside door panel to repair the problem.

i dont know if ur door is electric or manual.as for the door not opening from the inside it could be a rod has come off from the inside of the door to the handle you have to take inside door panel off and have a look.

Door inside hande may is disengaged Remove door inside panel to inspect.