SOURCE: hard starts even on cold mornings.
Need to check that glow plugs are working to spec and getting good power source
SOURCE: F350 Super Duty Diesel 2005
I had the same problem with my '05 F350, it's the Fuel Injection Control Module (FICM). My dealer replaced it under warranty, and even picked up the tow!!!!!!!!!
SOURCE: 2006 f350 wont start if warm
It is Vapor Locking at the Pump. The O rings are Swelling too much and will not allow the fuel to leave the Pump or enter the Injectors.
Ford knows of this Problem. Call a Local Mechanic He will have to Fix the Problem
SOURCE: ac relay location in fuse box
you have to refer to the owner's manual. that is where they list the fuse/relay locations. if not there, you may need to refer to the diesel supplement book. but i think it will be in the owners manual. i have a 2002 f250 and that's where mine are.
SOURCE: Shut 05 Ford f350 diesel off wont start
dies the truck restart once it cools off? it is very common for th 6.0 to have high pressure oil issues on a hot soak. they will run till the cows come home but once shut off they can not build up enough pressure by cranking speed alone to start truck until it cools down and the seals become rigid enough to bridge the gaps they are sealing in the first please. if this is the case. it may be the STC fitting ojn the back of the high pressure oil pump (intake and turbos must be removed to check) or possibly the branch tube o rings have worn. the branch tubes are located under the valve covers and supply the fuel injectors the oil they need to perform their "power stroke"...
118 views
Usually answered in minutes!
×