Question about 1996 Toyota Avalon
it is a self adjusting hydraulic clutch, if the clutch is engaging high on the pedal the clutch is worn out.
Posted on Nov 02, 2009
Testimonial: "THAT WAS FAST THANKS "
Easiest way is turn ignition switch on to run position do not start. Warning lights will light up on dash panel. There will be a orange light that comes on, if it has abs. Part of the self test diagnostics of abs system relates to this light coming on. If orange light goes on you have at least rear wheel abs. If you see wires coming out of the center of the back of each front wheel you have 4 wheel abs.
Posted on Jun 23, 2010
Testimonial: "Thanks! Quick and helpful answer. "
You do need to have a spring compressor. Get the McPherson spring compressor. It is a must. You can rent them at O'reillys auto parts, Kragen, maybe Auto Zone. To get a better understanding on how to change it out, I recommend a chilton 95-97 Camary Manual. Now I can't remember the exact tools you need but the ones I can remember are 22mm socket, 14mm socket, 12mm socket, for the 2 large stubborn bolts I had to impact drill them, and with that 12mm socket don't forget to take the brake line off the strut. When you jack up the car try using its stock jack stand if you dont want to bend the running bars underneath where you jack it up as the car is a unibody jacking it up too high will lift the cars whole side and you only need to jack it enough to take the tire off. The back struts require you to take out your back seat which are also easy to take out.
To remove the rear seat here a link, its on a 2000 but should be generally the same. I learn better with pictures anyway, hope this helps!
Posted on Jun 30, 2011
This is a fairly common problem more than likely what you're going to find is the revolution sensor on the top of the transmission just down from the bell housing has gone open. Remove the connector and ohm test the resistance through the sensor. You should have between 560 and 680 ohms of resistance. Check the pins in the connector and make sure there's no corrosion.
Posted on Oct 16, 2012
Tips for a great answer:
Mar 09, 2017 | 1996 Toyota Avalon
Sep 15, 2016 | 1996 Toyota Avalon
Jan 14, 2011 | 1996 Toyota Avalon
Jan 02, 2011 | 2000 Toyota Avalon
Nov 04, 2010 | 1996 Toyota Avalon
Sep 10, 2009 | 1996 Toyota Avalon
May 25, 2009 | 2003 Toyota Avalon
54 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: