SOURCE: How to replace a altenator belt on a 1995 plymouth neon
I had to put my 95 on ramps to make it easier to see. You have to loosen top adjustment nut, then in behind alternator is a bolt that goes through a plate that you have to turn clockwise, to tighten. I found it easier to see form under on ramps. You may have to loosen lower pivot bolt slightly too.
SOURCE: timing belt dodge neon 2000
Changing a timing belt is not a very easy task for a novice do it yourselfer. If you've never done it before you may want to have someone who has done it before help you out.
On most engines your going to have to take off a whole slew of parts to get to the timing belt such as timing cover, valve cover, belts, pulleys, alternator, a/c compressor, etc.
On a Honda Civic four cylinder engine it takes me about four hours to do in my own garage with simple tools. And I've done a few quite a few timing belts on different cars now.
I hope this gets you started in the right directions, and please let me know if I can assist you any further,
AadoubleA
SOURCE: 2000 Plymouth neon shaking right front tire/wheel
This could be a lot of things, CV joint, tie rods, wheel bearings, even loose lug nuts.
SOURCE: 2001 Plymouth neon needs tensioner assembly
Most tensioners have a bolt on the other side of the twnsion pulley, if not you have to replace the tensioner with the base.
SOURCE: how do i reset the timing belt on a plymouth neon
CLICK on the following LINK. It has the Timing Belt/Mark(s) Diagrams you will need.
If you would: Before Clicking: Let me know if this helped you, or if you have any additional information or questions. Feel Free to contact me at FixYa.com!
http://www.2carpros.com/car_repair_information/year/2000/make/plymouth/model/neon/2000_plymouth_neon_timing_belt_diagram_marks.htm
95 views
Usually answered in minutes!
×