We have the same problem, the ground wire from the battery is too small of a gauge. Replace it and it should be fine, get a size up gauge or you can use the same but expect it to happen again within a year when it corrodes again. It's a common defect in this model.
SOURCE: Sudden loss of power while driving
One thing you should notice that could tell you if the the engine is misfiring is that the check engine light will flash. If it dose it is saying you have a misfire in either one or more cylinders. If the check engine light dose not flash then it could be more of a fuel pump related issue. but as I said 1st thing would be to check the code... then i could tell you whats going on. good luck
SOURCE: Check Engine Light
If the light isn't flashing, it is safe to drive. If it is flashing, then catalytic converter damage can result. Have a parts store check the codes for you and come back and post the code.
SOURCE: I have a 2004 Chrysler Town and Country and my
P0440:
P0441:
Bad vacuum switch
SOURCE: 2004 chrysler pacifica check engine light code
The codes are both evap system codes. The only good way to find the leaks is to take it to a shop that has a smoke machine. They will pump smoke into the evap system to find the leak.
SOURCE: 07 chrysler sebring check engine light and gascap
there are solenoid in the evap system, one of them may be bad or vacuum line is broken
313 views
Usually answered in minutes!
×