2000 Chevy 2500 silverado 4x4 brake lights only work in park. One person had 98 and said the wires on theirs were messed up on neutral safety switch.

SOURCE: 98 chevrolet silverado k2500 4x4 left rear brake light not workin

I have the full wiring harness for the exterior lights if you need it. Send me a email with a link to this posting and I will send you the diagram. [email protected]

SOURCE: i have a 97 chevy silverado 5.7 4x4. the reverse

bad switch or out of ajustment

SOURCE: Neutral safety switch chevy silverado 02'

Hi Is a waterpump on a L300 4wd balt driven ?

SOURCE: I replaced my transmission in

pretty hard one.
First check th e bellhousing to make sure no wires got caught.
Check starter for broken wires.
Put emergency on and adjust linkage for the stops to be correctly aligned.go underneath and loosen the 1/2 bolt on the linkage make sure trans is in park and move until it can't go up any more.
.
That's
your starting point. now put gear shifter in neutral. feel the play in thetop
then in the bottom. you must equalize these distances so same loosness up / down..
If that doesn't work write back.

SOURCE: Safety Neutral Switch Problem

I assume manual? There should be a switch at the clutch pedal