Check contacts in drivers seat belt before anything else.
Testimonial: "thanks, i did that. also checked passenger side - no weight sensor for passenger and haven't found the contact for passenger buckled belt either thanks for the thought"
The contact is in the seat belt buckle where you push in the seat belt clip
×
SOURCE: Airbag Light
we were just at the ball field today and guy was having the same problem another father at the ball field was a mechanic. and he was telling us to see if it blinks it will blink a code. but ya have to be careful working on any of the conections you dont want to set off the airbags.Not alot of help but maybe point ya in a direction.
SOURCE: seat belt indicator
look under the drivers seat there is a plug that may be unplugged or broken this is what tells the light to stay on plug it in or try unplugging it and see what happens, on some of the 200 and up models the seat belt light may have some affect on airbags working properly, I have not found this to be the case on 97 model.
SOURCE: airbag light on
Most dealerships or garages with decent scan tools can find an air bag code if the light is on. The light might not turn itself off even when fixed and would have to be cleared. Also I've seen lights come on if someone has a large audio system installed and is drawing to much power. That is usually just a low voltage code with the system though.
SOURCE: srs airbag light is on on my 99 pontiac grand prix
If the seat belt light comes on intermittently with the belt buckled, it may have a bad switch in the buckle or a loose connection @ the switch. This may also set a diagnostic trouble code in the srs control module & keep the srs airbag light on.
SOURCE: warning light for airbag/seat belt pretensioners
Common fault on FORD
Usually due to a poor connection in the YELLOW PLASTIC CONNECTOR underneath the passenger seat.
Just push it together properly and it should clear the AirBag fault
88 views
Usually answered in minutes!
×