This link will show location and replacement proceedure How to replace PCV valve on GM 3 8L 6
SOURCE: PCV location on a 2000 buick lesabre
Open hood, top left side between the valve covers. There is a "funky" plastic housing that turns counter-clockwise (less than 1 inch of travel). then pull straight up to reveal the "missing" pcv valve.
SOURCE: PCV Valve Location
Its in the upper intake manifold on passanger side. Inside the manifold. Be sure to put o-ring on pcv or check engine light will come on.
SOURCE: pcv valve location
volvo s80 y reg 2.4 runs ok little bit lumpy tickoover when warm but very loud whistling noise take dipstick it stops but very big suction from tube not pressure it is not breather box under manifold
SOURCE: How do remove headlight assembly on 2005 Buick
I just changed the low beam bulb in a '05 Buick LaCrosse and found it really rather easy after researching it. I found no reason to remove the grill and the bumper cover, BUT you do have to remove the top 4 fastners that hold the grill assy to the radiator support, then you can work the headlight assy forward enough to work it out of the socket and turn it down so you can get to the bulb pockets on the back side. NO NEED to remove it all, just loosen it and gentley pry things forward enough to get the light assy out. ALSO> My supplier said his Wagner lighting book called for a 9006 bulb, but the car I worked took a H11. About 4x the money over a plain ol 9006 bulb but it might save someone picking up the wrong bulb. I hope this helps someone else out....Best of luck to you all
663 views
Usually answered in minutes!
×