Go to youtube
O2 Oxygen Sensor Replace on 2001 Town and Country
O2 Oxygen Sensor Replace on 2001 Town and Country
SOURCE: I need location of oxygen sensor on a 2001 town & country
ALL of your oxygen sensors are located i your exhaust system Your exhaust system starts at the exhaust manifold on the side of the engine and ends at the tail pipe by you back bumper. Your vehicle oxygen sensors are 4 of them there are two on each side of your exhaust the are actually screw into the exhaust they are like the nose of you engine to read how rich/lean the car is running. The are pretty simple to replace, they look kinda like spark plugs with wires attached to them the wires are usually colored white black and grey with plug connections on the end. To replace get a oxygen sensor socket and a ratchet and unscrew this socket can be bought at almost any auto parts place like auto-zone etc. Good luck and thanks for using FIX YA
SOURCE: location of the bank 1 sensor 2 O2 sensor on a 2001 ford escape
B1 means the sensor is located on the same bank of the engine that has the #1 cylinder. B2 is located on the opposite bank.
S1 means the sensor is located BEFORE the catalytic converter
S2 means the sensor is located AFTER the catalytic converter
You didn't say which engine you have, so I've included the diagrams of both 4 cyl and 6 cyl so you can see the banks
SOURCE: Bank 1 Sensor 1 - Oxygen sensor needs to be
The sensor you indicate would be on the manifold of the head containing cyl.# 1, top sensor (prior to catalytic conv.) 6 cyl. engine. 4 cylinder would be sensor on exhaust manifold. Confirm sensor failure prior to replacing as chrysler harness connectors are known for pin failures at 02 sensor connections. Inspect for burnt pins and cracked/chaffed wires first before changing sensor.
SOURCE: 2001 Olds Alero oxygen sensor bank 1 P0135
p0135 indicates bank 1 sensor 1 which is before the cat.
SOURCE: see a visual diagram of heat oxygen sensor bank 1 sensor 2 for ford taurus 2001
bank 1 exhaust is the rear manifold towards the windshield side. Follow the exhaust down. There should be one oxygen sensor before the catalytic converter and a monitor after the catalytic converter. Be Careful.. they look the same.
594 views
Usually answered in minutes!
×