How do i get to it and put it back on
SOURCE: Belt Tensioner located on 2000 ford Escort zx2
On the right side of the pulleys, there should be 3 top, middle, and bottom. The middle, smaller one, is the tensioner.
SOURCE: serpentine belt slips off idler pulley
The A/C pully is supposed to spin freely until the AC is activated to run.. The cranshaft pully does not. Replace the tensioner pully. The belt has to fit in between the grooves on the pullys.
SOURCE: Can't get A/C belt around pulleys on my 01 Chevy Tracker 2.5 V6
Removal & Installation
1.6L Engine
A/C Compressor Belt
To install:
Alternator Belt
To install:
Power Steering Pump Belt
To install:
SOURCE: tension pulley for the Serpetine belt
The tensioner is the 3 1/2" pulley located between power steering pump and alternator down about 5" on front of engine. Does it have air conditioning?
If you need the diagram please post your email address and I will email it to you as I do not know how to post pictures on this.
SOURCE: 2002 Ford Escort ZX2 serpinten belt routing & tensioner pulley
go to www.gates.com on the lower right hand side under popular topics, click on timing belts, then on the left hand side click Parts Locator and Interchange, enter your cars info and the first page that comes up will show you a camera icon for a pic of how your belt is routed. The tensioner pulley is the one mounted on a silver arm, usually at the top. Hope this helps let me know.
178 views
Usually answered in minutes!
×