I have a 323 mazda 2003 model the gear dose not shift and the car dos not move when the car is cold and the (Hold )lamb is appearing by the way i have changed the gear oil and filter.

SOURCE: mazda 323 familia automatic is not changing gears only 1,2 and R

hi

it seems that the gear bushings have worn out. you need to take your car to a mechanic to have the bushings changed. Also, please check it your car has enough Automatic Transmission Fluid.

i am always here
kind Regards
RAhUL_hunk

SOURCE: My car will not Shift gears; Its stuck in first gear

hi,it seem your car is in emergency mode,you can check oil lever if deep stick is present,if not, better to bring your car to your dealer for proper diagnose,maybe erase fault only,ty

SOURCE: 2003 chevy trailblazer does not move

Does it sound like it is in neutral when you have it in gear? If so, your linkeage from shifter to transmission needs to be adjusted. If you follow the cable, you should see an adjustment for it.
Turn to right to tighten it and left to loosen it.

If it tries to move but doesn't, it may be e-brake stuck. Most likely linkeage needs adjustment or vacuum line came of tranny.

SOURCE: Mazda 626 - Hard to shift into gear.

With any vehicle that has a hydraulic clutch, a worn master cylinder or slave cylinder will give this very symptom. First step is to check the fluid in the resivor. If it is low, you will want to check for fluid bypassing the seals. Be sure to check under the rubber dust cover as fluid can collect there and not be readily visible. Also, if the fluid in the resivor is dark colored, it is an indication of the internal seals going bad and you will need to replace the cylinders.

SOURCE: why HOLD shows on the dashboard of a mazda 323?

why does hold come on dashboard