Cars & Trucks Logo

Related Topics:

G
Graham Raby Posted on Feb 27, 2018

WHAT IS p1143 P1144 ABS CODE FAULT ?

FORD FIESTA 1.4 PETROL . ABS LIGHT ON , READ WITH SNAP ON CODE READER . REAR ABS TOOTH MISSING ? REPLACED BOTH REAR ABS MAGNET RINGS . NEW SENSORS . FAULT STILL THERE ?

1 Related Answer

alicantecoli

Colin Stickland

  • 22516 Answers
  • Posted on Feb 16, 2012

SOURCE: heater control sensor ford fiesta 2003

if its a diesel engine then their is a relay/timer box but this is a petrol so iam at a loss as to weither this is a code reader fault reading the fault as i have two code readers and cannot get into a ford of this age it will only read the vin number so iam at a loss as to either a cab heater fault which i cannot see throwing the engine light on or the autochoke sensor because all these code readers give the answer in good old american and we all know they cannot spell colour correctly or pronounce aluminium.Bless them no go for the engine autochoke sensor and check that out first but the main cause of the light on with a ford of this year is the O2 sensor their are two wires the same colour out of the four wires now disconnect the socket and check for a continuety on the sensor side of the socket and if no continuety then renew the sensor if a check shows continuety the check the opposing plug socket and check for a 12v supply .Hope this helps and sorry i cannot pronounce aluminium or know the difference between a saturn or a windstar and think all nissans are diesel ,red face on my part here but iam a brit living in spain .

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

I have a 2006 ford fiesta 2door 1.4i duratec engine my speedometer does not work, the abs and engine light has come on. What could cause this.

Might have to put on diagnostic code reader to clear engine light and see if you have a problem,or the abs sensor fault could be stored in ECU needs removing before light god out,try disconnecting battery for half an hour see if this clears the ECU if not diagnostic required
0helpful
1answer

Ford fiesta 04 aBs light won't go off

The ABS light is on because the system control module has detected a fault in the ABS brakes and the system is turned off and the light is then turned on. You need the ABS scanned as there will be a fault code present.
0helpful
1answer

Ford fiesta engine light

If the engine light is on then your ECU has detected a fault. Either in the engine or another system. You can buy a cheap reader at the parts store. They are good for active codes and resetting the Engine light. But not for codes stored in the history. Depending on which reader you buy, you may or may not be able to read Transmission, ABS, Body Control, or Air-Bag codes. Professional readers are very expensive so you may want to let a mechanic read it (get a price first). Do some research before you decide.
0helpful
1answer

I have a 2004 ford fiesta 1.4 tdci,at the moment the car is still in a non ford garage ,it went in for a osf wheel bearing replaced,it came back to me with the abs light on,after the front wheel was...

abs sensors run very close to the rotor in the disc or hub and can be easily damaged it the play in the failed bearings was sufficient to allow it to touch
when doing the wheels and bearings it is important not to damage the sensor if it was not touching the rotor
if it damaged or the wiring is not connected , the abs light will be on
you can get sensors from the wreckers /junk yard at a good price
after replacing the rear wheel bearings and the hand brake light is on suggests that the correct procedure was not used or the cabling was adjusted off to get the callipers off the disc and not properly adjusted on completion of the job
as the work is being done in a confined space it is possible that a harness plug was disconnected to get access
you have several options
1---have the fault codes read, fix any sensor problem,
2-- take it to an accredited service center that has experience on your make of vehicle as I think that going back to the original shop is not a good idea
0helpful
1answer

Heater control sensor ford fiesta 2003

if its a diesel engine then their is a relay/timer box but this is a petrol so iam at a loss as to weither this is a code reader fault reading the fault as i have two code readers and cannot get into a ford of this age it will only read the vin number so iam at a loss as to either a cab heater fault which i cannot see throwing the engine light on or the autochoke sensor because all these code readers give the answer in good old american and we all know they cannot spell colour correctly or pronounce aluminium.Bless them no go for the engine autochoke sensor and check that out first but the main cause of the light on with a ford of this year is the O2 sensor their are two wires the same colour out of the four wires now disconnect the socket and check for a continuety on the sensor side of the socket and if no continuety then renew the sensor if a check shows continuety the check the opposing plug socket and check for a 12v supply .Hope this helps and sorry i cannot pronounce aluminium or know the difference between a saturn or a windstar and think all nissans are diesel ,red face on my part here but iam a brit living in spain .
0helpful
1answer

Fiesta duratec 2005 Abs warning light on

Whenever the ABS module turns on the ABS light in the dash it is to alert you to the fact that a fault has occurred in the ABS system and the control module has turned off the ABS brake control, you now have regular non ABS brakes. The waring light will stay on until the fault is corrected. Since a large number of problems would cause this you must get the control module scanned to retrieve the fault code that was set in the control modules memory when it turned on the light. Once the fault code is known the process of diagnosis and repair can begin.
0helpful
1answer

Please note the car is ia fiesta not focus( it is not listed in the listing) ford fiesta 1.4 petrol year 52 engine failure / rebuild head various dtc faults cleared ignition is coming on but car...

The code U1262 point out a communication fault between the vehicle modules and a scanner. It may be best to visit your local dealer to find if one of the vehicles control modules has failed. In some cases this can be as simple as a blown fuse, but there is always a reason for a fuse to blow
and a oil sending circuit fail. would need to be tested.
P1000 DTC code is a manufacturer specific trouble code. your code reader is not reading or communicating correctly you will need to check the fuses for all the modules and check the connections on the plugs and the units to check the modules to see if they have good contact. also check the main earth from the battery to the shell and make sure the contact is good.
1helpful
2answers

Check abs system lite on how do you find the code list

ABS Fault Code List 1991 Corvette (C4)
Code Definition
21 Right Front Wheel Speed Sensor Fault
22 Right Front Toothed Wheel Frequency Error
25 Left Front Wheel Speed Sensor Fault
26 Left Front Toothed Wheel Frequency Error
31 Right Rear Wheel Speed Sensor Fault
32 Right Rear Toothed Wheel Frequency Error
35 Left Rear Wheel Speed Sensor Fault
36 Left Rear Toothed Wheel Frequency Error
41 Right Front Solenoid Valve Fault
45 Left Front Solenoid Valve Fault
55 Rear Wheels Solenoid Valve Fault
61 Pump Motor or Motor Relay Fault
63 Solenoid Valve Relay Fault
71 Electronic Brake Control Module Fault
72 Serial Data Line Fault
75 Lateral Accelerometer Fault (Short ot Open)
76 Lateral Accelerometer Fault (Signal out of Range)
Not finding what you are looking for?

168 views

Ask a Question

Usually answered in minutes!

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

xxxxxx xxx

Level 3 Expert

5117 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...