How do I reset sensors on 2018 crv warning lights where are the sensors for lane change and collision

Video instructions here

https://www.google.com/search?q=open+a+2018+Honda+CRV+glove+box+with+a+broken+latch

..

Did you replace the level sensor that is in the coolant reservoir? That is the one that sends the signal to the computer to set the light.

THAT IS DEALER ONLY QUESTION. FOR SURE UPGRADED PROGRAMMING. ( why assume there is?)_
ALL SPEEDS (SEEDS).
WELL PROBABLY NOT, WHEN IN ,PARKING MODE.

FIRST GOOGLE HIT (EVER GOOGLE>?

The minimum speed for FCW activation is 5 mph (10 km/h).
OR ASK THE DEALER
OR GO THERE AND READ THE TSB FOR FCW UPGRADES.
TSB ARE RECALLS AND UPDATES. AND WARNINGS OR NEW PROCEDURES ON ALL CARS. LEARN TO READ ALL TSB ON ALL CARS WORKED ON FIRST.

It will go out on its own once the tires are filled

You need to provide, the make, model and year for anyone to be able to answer this question

probably an activated inertion switch/ sensor from the collision
reseting the ecm with a scanner may reset it

It is for sure that the front collision has done the damage to all the sections mentioned and it was important that before you took delivery of the car a proper trial test run was important. It will be best to get this back and have it checked to rectify the above faults.possible cable , sensor, gear could be damged and might need replacement.

This light indicates that at least 1 of your tires has lost 25% of its pressure. Check & inflate all tires to desired pressure then reset the sensor by pressing the button on the bottom left of the dash.

add some driving lights or re aim your high beams lower so you can use them all the time.