Can anyone tell me where the fuse or relay for the central locking system on a 2006 right hand drive kia sedona 2.9 D

SOURCE: how do you change the right front headlight bulb on a kia sedona

Remove the headlight assembly. Just remove the 3 bolts with a 10 mm socket and pull it out so you can disconect the wire harness. After that pull the whole assembly out and unscrew the bulb cover. The bulb is held in with a spring clip.

SOURCE: central door lock system not working

CHECK THE DOOR LOCKS MAIN FUSE.

Testimonial: "Great, it helps"

SOURCE: 2006 kia sedona a/c keeps

My kia sedona minivan keeps blowing the fuse to the a/c compressor. Does this mean that I have a bad compressor or is there a less expensive esier fix? Any ideas?

SOURCE: please tell me how to

Hi,

Unfortunately, there is no easy way - the upper intake (surge tank) has to come off in order to access the plug wires and plugs.


Removal

1. Detach the P.C.V. hose and brake booster vacuum hose.
2. Disconnect the connecting part of vacuum hose.

3. Remove the surge tank stay.

4. After reducing the pressure of fuel pipe line to prevent fuel overflow, disconnect the connecting part of the high pressure hose.

5. Remove the surge tank stay.

Once this is off, then remove ignition coils and spark plug wires. At that point, you can access and remove the spark plugs:

REMOVAL AND INSTALLATION OF SPARK PLUG CABLE

Improper arrangement of spark plug cables will induce flashover between the cables, causing misfiring and surging at acceleration in high-speed operations.

Disconnect the spark plug cable from the spark plug. Pull on the spark plug cable boot when removing the spark plug cable, not the cable, as it may be damaged.
2. Using the spark plug wrench, remove all of the spark plugs from the cylinder head.Take care not to allow contaminants to enter through the spark plug holes.

3. Check spark plugs for the following:

(1) Broken insulator

(2) Worn electrode

(3) Carbon deposits

(4) Damaged or broken gasket

(5) Condition of the porcelain insulator at the tip of the spark plug

4. Check the spark plug gap using a wire gap gauge, and adjust if necessary.
Standard valueSpark plug gap : 1.0 - 1.1 mm (0.039 - 0.043 in.)

5. Re-insert the spark plug and tighten to the specified torque. If it is overtorqued, damage to the threaded portion of cylinder head may result.
Tightening torqueSpark plug : 20 - 30 N·m (200 - 300 kg·cm, 15-22 lb·ft)



Let me know,if needed further assistance.

Hope i helped you.

Thanks for using ' Fixya ' and have a nice day!!

SOURCE: location of fuse for window washer on 2006 KIA

fuse is under hood in fuse compartment the washer pump is under right front fender well on bottom of washer bottle