Question about 2001 Dodge Grand Caravan

Open Question

Blend door removal for 2001 dodge grand carvan

Posted by on

Ad

6 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Anonymous

  • 7 Answers

SOURCE: blend door

Yes take the glove box out. Once done you should see a control that kinda resembles a boot and it has a small white arm on it that looks like a straw and has two phillip head screws that should be removed then disconnect the wire connection to it. Once you do that get a dremmel tool and cut a hole wide enough to see the doors they are right behind that black wall and dont worry its ok to cut that spot out all that comes out of it is air and it wont bother anything. you can take the doors out from there or at least see wuts wrong with it. More that like that thing i said that looked like a straw is connected to an actuator arm which the doors are connected to. You can see if they are broke or the arm just needs replacing from there. Doors up for heat------Doors down for a/c. You will see what i mean. If I confused ya then go to www.heatertreater.net and it will give you a picture of what i mean....

Posted on Nov 26, 2008

Ad

Anonymous

  • 3 Answers

SOURCE: How to change heater blend doors on 2003 Jeep Grand Cherokee

go to wjjeeps.com there is several pictures and step by step instructions.

Posted on Dec 29, 2008

Anonymous

  • 19 Answers

SOURCE: Remove inside panel pass.side door of 2001 Dodge gr.caravan sport

1, Disconnect the able from negative terminal of the battery.
2. Pry the courtesy light from the door trim and disconnect the wire connector..
3. Remove all door trim panel retaining screws and door pull armrest assemblies.
4. Remove the door switch panel and the control switch panel and the control switch assembly.
5. On models with memory seats/mirrors, use small-flat bladed pry tool to remove and disconnect the wire.
6. Grasp the trim panel lift up and pull out to detach it from the door. Disconnect the inner door handle lock rod from the handle. Unplug any electrical connectors remaining and remove the door panel.
7. To install, connect the wire harness connectors and place the panel in position in the door. Press the trim panel down into place until the hooks are seated.
8. Install the armrest/door pulls, the courtesy light and the window switch'
9. Reconnect the battery


Also. You will need star pattern drivers to remove the window and motor from your door. If you have all the equipment it should only take you 1 hour.

Posted on Jan 15, 2009

transit360

  • 74 Answers

SOURCE: 1997 jeep grand air blend door location

The Jeep Grand Cherokee sucks air from the outside via a hole on the passenger side of the cowl. It's under the black plastic piece that runs under the wipers.

The air is then sucked via the blower and blown into the housing where the heater core and A/C evaporator core live.

The blend door is inside this housing as well.

This also depends on if you have regular climate control or the more advanced ATC digital climate control found on some of the Limiteds.

You could possibly take out your glovebox and see if there are any broken pieces going to the door accuator.

Otherwise if it's internal, you'll need to take out the heater/ A/C housing.

To get to this housing, you have to take apart your entire dash, lift the top dash cover off, and then you'll see the housing. You could possibly check for a few thing there.

Most everything there is vacuum controlled.

You have to drain your antifreeze and have your A/C freon discharged (use a professional to capture the freon).

There are 5-6 nuts holding the housing to the firewall. You have to reach these from the engine compartment.

Disconnect your A/C lines and heater hoses. Pull out housing.

This is definately an advanced project, thus the reason for the high pricing.

Hopefully you can get it fixed without having to take this Jeep apart entirely. Try diagnosing with a vacuum gauge if necessary before tearing it apart.

Posted on Feb 10, 2009

super_guy

  • 1986 Answers

SOURCE: 2005 Dodge Grand Carvan / Removing sliding door panel

You'll need to remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. If needed, you can pull back the weather seal (can't reuse it, but it's not that important) and you will be able to access everything inside the door

Posted on Aug 14, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have 2006 dodge grand caravan


Remove the inner panel of door not opening and reattach the linkage to open the door.

Mar 18, 2016 | Dodge Cars & Trucks

1 Answer

How do I replace a rear door on a 97 dodge carvan


its a heavy door there are hinge bolts up at top, and then you have to take off the lift supports and then its removed it easier with a second person.

Jul 27, 2010 | 1997 Dodge Grand Caravan

2 Answers

2001 jeep grand cherokee code 56???


hi
your blend doors are damaged or broken, go to heatertreater.net they have a quick fix blend door repair kit that you can install yourself in around half an hour, this really works as i have fitted a few myself. jeep will quote you around £800 to fix.
hope this helps

Sep 03, 2009 | 2001 Jeep Grand Cherokee

1 Answer

2005 Dodge Grand Carvan / Removing sliding door panel


You'll need to remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. If needed, you can pull back the weather seal (can't reuse it, but it's not that important) and you will be able to access everything inside the door

Jun 19, 2009 | 2006 Dodge Grand Caravan

1 Answer

The airbag light comes on and stays on for about 20 seconds while driving. Does this intermittantly. Dodge grand carvan sport 2001 Whats it trying to tell me?


More than likely the clock spring (spiral connection) will need to be replaced, but you need to have it scanned for codes to verify. It can be several other things as well but most of the time it's the clock spring. Don't put it off too long, when the light is on the airbag system is dissabled.

Jun 11, 2009 | 2001 Dodge Grand Caravan

1 Answer

Only High speed blower front on 01 dodge grand carvan


Sounds like you need to replace the Blower Motor Resistor. It is located on the bottom of the heater box about where the passengers left foot would rest, behind glove box. It has 2 screws holding it on.

Jun 08, 2009 | 2001 Dodge Grand Caravan

2 Answers

2001 jeep grand cherokee


THOSE VEHICLE HAVE SEPARATE BLEND DOORS THAT CONTROLS HOW MUCH HEAT/COLD YOU WANT. BLEND DOORS ARE FLIMSY AND TEND TO BRAKE AFTER A WHILE. THE ONLY WAY TO FIX IS BY REPLACEING THE BEND DOOR (S).EXPENSIVE REPAIR. WHOLE DASH HAS TO COME OUT. PART IS CHEAP BUT A LOT OF LABOR

Dec 30, 2008 | 2001 Jeep Grand Cherokee

1 Answer

1999 dodge carvan


i had the same problen with mind, i spray w d 40 in lock and open the door spray inside the door , remove the 2 round plug, spray in there

Jun 30, 2008 | 1999 Dodge Caravan

Not finding what you are looking for?
2001 Dodge Grand Caravan Logo

Related Topics:

55 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

Marvin
Marvin

Level 3 Expert

85223 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...