2 WD or 4X4 ? Don't know if that would make a difference .
BRAKE Fuse #3
10A
Electronic Brake Control Module (EBCM) Fuse Block
On the lower left side of the IP
ABS Fuse #2
60A
Brake Pressure Modulator Valve (Pump) Engine Wiring Harness Junction Block
At the left side of the engine compartment near the battery
SOURCE: 2000 ABS relay location
Unfortunately the ABS relay is built into the EBCM. Electronic Brake Control Module. That is located on the frame rail, left side of vehicle and sits on top of the pump. Both parts are likely to be replaced together as getting the module off the pump can be difficult. I recommend a repair facility do this job but it can be done at home. You will likely need to take loose metal brake lines and that can be quite a task also.
Are you getting a code for the relay / EBCM?
Good luck
Please rate my answers if they helped.
Brett
5,898 views
Usually answered in minutes!
×