I hav a 2000 ford expedition eddie bauer edition I need to know which fuse is the ignition switch relay and where

SOURCE: diagram bypass heater cord on 2001 ford expedition eddie bauer

the heater bypass is quite simple, if you look at the firewall you will see two medium sized coolant lines, remove them from the firewall and link them together using a proper sized tube, you can purchase a kit at a parts store quite cheaply

Jon Adamson

• 167 Answers
• Posted on Oct 25, 2009

SOURCE: Location of Shift Solenoid in 1999 Ford Expedition Eddie Bauer?

They are round "cans" with wires attached. You should have SSA, SSB, SSC, Torque converter and Pressure Control solenoids. They control pressures and have no mechanical linkage.

Colin Stickland

• 22516 Answers
• Posted on Oct 16, 2010

SOURCE: I need the wiring diagram for a 2003 Ford

simple design but it works

SOURCE: How do you change a flywheel on a 1998 Ford

You will need to remove the transmission and (transfer case )if equipped to gain access to the flywheel. Once the tranny is out of the way you will be looking at the flywheel. If it is an automatic you will need to remove the torque converter bolts from the flywheel before tranny removal. Also if it is an automatic be sure to get the torque converter to engage the front pump in the tranny when you reinstall.

SOURCE: where is the powerlock relay located on a 1998

The Aux. Relay Box #4 is located in the rear driver side removable panel with the jack. The box holds the Door lock and unlock relays; The driver's door lock/unlock relay and the ACC. Lights relay.