Cars & Trucks Logo

Related Topics:

d
diego hernan Posted on Dec 17, 2017

What is the power of engine plymouth sport fury cabriolet 8 cylinder 1967

Engine power

5 Related Answers

george parkes

  • 980 Answers
  • Posted on Apr 11, 2009

SOURCE: Where is the fuel filter located for a 1987 Plymouth Gran Fury?

Fuel filter should be pass side front of engine,down low by the pump

Ad

Anonymous

  • 6982 Answers
  • Posted on May 29, 2011

SOURCE: timming setting for a 1968

Factory setting was 2 degrees advanced, but most ran far better at 4-6 degrees. Limit on timing is how far you can go without hearing any detonation when you "get on it" under a load. When you reach that point, back off a few degrees. Advancing the timing lights the fuel in the cylinders early. At speed, the time it has to fully burn is very short. The sooner you light it, the better the chance that all fuel is converted into usable energy instead of going out the exhaust. The limiting factor in this is fuel quality as most available fuels are nowhere near the quality they were when your engine was produced.

cy schousboe

  • 2002 Answers
  • Posted on Jun 04, 2011

SOURCE: I need a wiring diagram

Check out faxonautoliterature.com. There you can get the original 2 volume dealer service manuals for your car ($39). They will have the complete wiring diagrams including optional equipment as well as everything else. I've used them before and had excellent service. Hope this helps.

PAPPY 64

  • 6 Answers
  • Posted on Sep 25, 2012

SOURCE: i have a 1967 plymouth fury 318 5.2 v8 i have been putting back the engine together after we overhauled it and i have it running and it sounds pretty good but something still isn't right i have th

On a 67 unless you changed it over to computer functions NO
Cause in 67 they was simple, look into your transmission for problems

Chris Prioli

  • 183 Answers
  • Posted on Oct 05, 2012

SOURCE: firing order for a 1983 plymouth grand fury with a 318 engine

1-8-4-3-6-5-7-2

Distributor roatation is clockwise; odd cylinders are on left side of vehicle with #1 at left front.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1helpful
1answer

What is the engine power of the truck Chevrolet C 40 of the year 1964 ?

Chevy trucks produced in 1964 are part of the modern V-8 engine era of trucks. The standard engines were 230 and 292 cubic-inch, six-cylinder engines for all two-wheel drives. In 1964, these engines were available for four-wheel drive pickups also. The 283 cubic-inch, V-8 engine was optional. The V-8 engines did not begin to outsell the V-6 until 1967. Two-wheel drive models were rear-wheel drive.
0helpful
2answers

1968 plymouth fury III firing order

If it's a v8, and most likely is... 1,8,4,3,6,5,7,2, Good luck.
0helpful
1answer

Firing Order 1965 Plymouth Fury 111 Stationwagon

Hello Katherine, The firing order for a Plymouth in-line 6 cylinder is 1-5-3-6-2-4. The firing order for a Plymouth V-8 is 1-8-4-3-6-5-7-2.
1helpful
1answer

Firing order for a 1983 plymouth grand fury with a 318 engine

1-8-4-3-6-5-7-2

Distributor roatation is clockwise; odd cylinders are on left side of vehicle with #1 at left front.
0helpful
1answer
0helpful
1answer

I need a wiring diagram for a '78 PLymouth Sport Fury I am restoring

Check out faxonautoliterature.com. There you can get the original 2 volume dealer service manuals for your car ($39). They will have the complete wiring diagrams including optional equipment as well as everything else. I've used them before and had excellent service. Hope this helps.
1helpful
1answer

Timming setting for a 1968 plymouth fury 111 with 318 engine

Factory setting was 2 degrees advanced, but most ran far better at 4-6 degrees. Limit on timing is how far you can go without hearing any detonation when you "get on it" under a load. When you reach that point, back off a few degrees. Advancing the timing lights the fuel in the cylinders early. At speed, the time it has to fully burn is very short. The sooner you light it, the better the chance that all fuel is converted into usable energy instead of going out the exhaust. The limiting factor in this is fuel quality as most available fuels are nowhere near the quality they were when your engine was produced.
0helpful
1answer

Tune up specs needed

1968 Barracuda with a 318cid; The 5th digit of the vin will be (F) for the engine-318 2v rated @ 230hp.

Compression pressure--125-155 max variation 25
Spark plugs--Champion N-14Y @ .035" gap-torqued @ 30ft. lb.
Timing--man. trans @ 5 degrees btdc, auto trans @ 10 degrees btdc.
Points-- .014"-.019" gap--Dwell--28-33 degrees, max variation is 2 @ 1500 rpm--Spring tension--17-20 ounces.
Fuel pump pressure 5-7 lbs. manual pump
Hydraulic Lifters--no valve clearances
Firing order--1-8-4-3-6-5-7-2 counterclock wise rotation
Idle speed--Turn headlights on highbeams and turn a/c off
500rpm for man trans--500rpm auto trans in neutral.

Left bank of the engine (driver's side), 1-3-5-7 Right bank (passenger side), 2-4-6-8
0helpful
1answer

Where is the fuel filter located for a 1987 Plymouth Gran Fury?

Fuel filter should be pass side front of engine,down low by the pump
Not finding what you are looking for?

28 views

Ask a Question

Usually answered in minutes!

Top Plymouth Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Plymouth Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...