Unable to remove ignition key stuck in acc won't turn off had it checked by AAA locksmith said cylinder is ok that trans/linkage is the problem
Best Manuals Go to online store reliable they have repair manuals I am sure you will get the solution. Here's the link
SOURCE: key stuck in ignition halfway to ACC position and will not turn
try wd40 and shaking the key, what happens is one of the tumblers get stuck and wont let the key turn if that dosnt work let me know worst case you will have to replace the ignition its about $35 to $40 and a few hours.
SOURCE: 2002 Saturn Vue Ignition Cylinder lock problem
The keys on this vehicle have a problem with wearing down to the point where it's a pain to get them to work in the ignition cylinder. Examine your keys for wear and that may have been your problem since day one.
I have a 2004 Vue and I have the only key I got with it (used car) worn down to the point where it will no longer work in the back door and is a pain to use in the ignition cylinder. It also falls right out of the ignition cylinder when the car is running. I have a copy of the key that was made when I got the car which works just fine and doesn't fall out, and looking at the two side by side, you can see that Saturn's key has worn down substantially since I got it two years ago.
SOURCE: 1994 Saturn SL2 Key stuck in ignition cylinder
Put some pressure on the steering wheel in one direction or the other this may take the pressure off the cylinder itself and allow you to do what is needed...hope this works.
SOURCE: How do I remove the ignition lock cylinder from a
REMOVAL
INSTALLATION
IMPORTANT:
Actuator blade within ignition module housing must be in ACC position to
install lock cylinder assembly. If rotated, replace it to ACC position,
using needle nose pliers.
Testimonial: "Great information! Thanks for the help. Now I can get the ignition rekeyed to match the doors after the dealer changed the switch."
915 views
Usually answered in minutes!
×