Question about 2002 Hyundai Accent

Open Question

How to disassemble front bumper hyundai accent 02 hatch back

Posted by on

Ad

6 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Dean

  • 65 Answers

SOURCE: Hyundai 2001 Accent Code - P0130

I think this is the O2 sensor - It will run fine but you might notice your gas mileage slipping and will not pass emissions.

Posted on Aug 07, 2008

Ad

daveleeyates

  • 65 Answers

SOURCE: Hyundai Accent SI-back windscreen wiper

there is a 15 amp fuse for the rear wiper under the bonnet check this, also i think the accent has a seperste switch in the dashboard for the rear wiper like th hyundai coupe.


Posted on Mar 24, 2009

stevenhurc

Steve Hurc

  • 459 Answers

SOURCE: Front speakers not working on hyundai accent

check wiring in door hindge area for breaks move around loom while listening to radio to hear if speakers start to crackle or work

Posted on May 27, 2009

ghost4548

Paul McGrath

  • 776 Answers

SOURCE: 2003 Hyundai Accent Front Brake Pad Thickness

The nominal thickness is 10 mm - minumum is 2 mm.

Posted on Jun 20, 2009

jamie

  • 1810 Answers

SOURCE: How do I disassemble the [center]dash to replace

remove all the screws
there are 2 in center console at side 2 in ash tray and 2 others usually look arround pull gentley and locate all screws

Posted on Jan 10, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to remove the rear seat in a 2003 Hyundai Accent (Hatchback)?


I'm not sure about your car but I have a Scion TC and I had to remove the cover at the spare tire in the hatch area then there are 3 bolts holding the seat in that need to be removed. Hope it help you.

Oct 07, 2015 | 2003 Hyundai Accent

1 Answer

How do you remove sub frame to remove transmission in 2002 hyundai accent?


transmission in automatic 02 hyundai accent is side mounted therefore needs to be removed through the passenger front tire.

Mar 03, 2013 | 2002 Hyundai Accent

1 Answer

W/shield washer reservoir replacement on 2007 Hyundai Accent


if the same design as 2004 Accent then just remove right front wheel, slide underneath, and start wrenching on it. should be 2 or 3 bolts

Feb 08, 2013 | 2007 Hyundai Accent GS Hatchback

1 Answer

Hyundai accent 02 changed washer pump, but still no water to rear screen , front screen works okay,suspect wires or fuse ,please help


I have had 4 saturn, 1 subaru, 1 suzuki, 1 hyundai wagons and all of them had a separate pump and reservoir for the rear wiper. Are you quite sure that the front pump supplies the rear window?

Oct 28, 2010 | 2002 Hyundai Accent

1 Answer

2008 accent need front bumper replaced,do you have a schematic showing where the nuts an bolts are?


the best thing for you to do is stop by your Hyundai dealership in the parts department and they be able to print you off pictures and diagrams showing you how many there is and how it comes a part.

Dec 17, 2009 | 2008 Hyundai Accent

1 Answer

How to remove door handle. 2 dr hatch, 1999 accent


YOUTUBE ALPHA Q AUDIO, IT MIGHT BE HELPFUL

Dec 02, 2009 | 1999 Hyundai Accent

1 Answer

2004 accent 02 sensor


eh nevermind it was right in front of my face. its really easy to spot.

Oct 30, 2009 | Hyundai Motor 2004 Accent

1 Answer

How much air pressure in my tires ? 185/60R 14 I


34 PSI IS THE MOST WIDELY RECOMMENDED PRESSURE FRONT AND REAR.

Jul 17, 2009 | 2003 Hyundai Accent

1 Answer

How do i replace the front wheel studs on my hyundai accent


Hyundai in all their wisdom decided to use captive dust shields on the disc brakes. You need to completely disassemble the hub to get the shield off. On my 2008 Accent there is one spot that if you rotate the rotor to that spot and bend the shield back you can then get the stud in place. Be sure to get the right stud as the rear and front are probably different part numbers.

To get the old out use a hammer and a punch to pound them out the back. To get a new one in push it in as far as you can, then using something as a spacer (large nut or washers) and the wheel lug, tighten the stud up drawing it into the rotor.

Jan 08, 2009 | 2000 Hyundai Accent

Not finding what you are looking for?
2002 Hyundai Accent Logo

Related Topics:

51 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

Marvin
Marvin

Level 3 Expert

85222 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...